[China Aluminum Industry Network] 1. Purpose To track down the sources of defective products and improve the production efficiency and product quality of aluminum extrusion molding.
Second, the scope of application applies to all company-related departments and personnel.
Third, the management and control methods 1, feed all the materials received by the material member into the designated location, so as not to be confused, while the incoming information by the material officer for classification registration, including customer name, incoming quantity, incoming date, material location, feeding And recipients and other information. After placing the materials, the typist shall be notified in a timely manner to make the corresponding imprinting numbers for all K91 materials, and then put them into the designated position to be processed, such as:
The bottom left corner of the product is marked with "H3080913" (H stands for company, 3 stands for aluminum extrusion supplier, 5 stands for aluminum extrusion supplier, 6 stands for aluminum extrusion supplier, 0809 is production date 13 for aluminum extrusion die) 144001 (144 stands for aluminum Extrusion station number, 001 stands for serial number).
2. Raw materials for all processing machines of the process are uniformly distributed by the material personnel, and registration information is made well. This includes all the required processing personnel and process information for all machines. All operators are not free to go to other machines for interaction. Take the material for processing.
The same processed product is placed in the designated position, and the material member will receive the material uniformly to avoid confusion of the die number.
3, shipping inspection inspectors need to carry out separate inspections according to different model numbers, do a good job in the inspection records of different model numbers and archive, easy to view later, at the same time, when packing and shipping, packing should also be based on a different model number Separate the packaging and label it clearly.
4. After summarizing all the products that have passed the internal inspection and passed to the customer, the products that are not qualified after being inspected by the customer or confirmed by the assembly can be traced directly to the product according to the model number of the product, and analyze the bad causes of the products. Quality and engineering work together to negotiate an improvement measure to prevent similar situations from happening again.
Made / Date:
Review/date:
Approval/date:
Bathroom Hardware Set Including Towel Bar , Towel Shelf, Towel Ring, Toilet Paper Holder, Robe Hook , Soap Holder and Glass Holder can choose.
Bathroom Hardware Set,Bathroom Accessories Simple Set,Stainless Steel Hardware,Bathroom Hardware Accessories Set
Kaiping Jenor Sanitary Ware Co., Ltd , https://www.jmjenorsanitary.com