Overview of Large Pump Station Blower Systems
In a large pumping station, ensuring proper ventilation within the pump room is essential not only for maintaining optimal air quality but also for safeguarding the health of employees. To achieve this, an axial flow fan is installed on the pump room roof, providing necessary air supply. The ventilation system operates at a rate of six air changes per hour, ensuring that fresh air circulates through all levels of the pump room. Each duct outlet is equipped with a rectangular, adjustable louver diffuser. These louvers allow operators to customize airflow and wind direction as needed, with approximately 65% of the total air volume being directed into the pump room.
Technical Specifications for the Blower System
The axial flow fan used in this setup is the SWF-I type No. 9. Below are its key technical parameters:
| **No.** | **Name** | **Parameter** |
|---------|---------------------|--------------------------------|
| 1 | Model/Type | SWF-I type No. 9 / Axial |
| 2 | Air Volume | 23,400 ~ 29,826 m³/h |
| 3 | Total Pressure | 273 ~ 360 Pa |
| 4 | Motor Power | 7.5 kW |
| 5 | Motor Speed | 720 rpm |
| 6 | Full Load Current | 17.2 A |
| 7 | Starting Current | 94.6 A |
| 8 | Noise (at 1m) | 80 dB(A) |
| 9 | Direction | Counterclockwise (from coupling end) |
| 10 | Efficiency | % |
Control Modes
The blower system can be operated using two primary methods:
1. **On-Site Control**: Operators can manually adjust the fan's operation based on ventilation requirements. This includes starting or stopping the fan and adjusting the louver openings to regulate airflow and wind direction.
2. **Remote Control via Host Computer**: The fan can also be controlled remotely using a central computer system. This allows for automated adjustments based on preset schedules or real-time data inputs.
Maintenance and Care
To ensure the longevity and efficiency of the blower system, regular maintenance is crucial. Here are some best practices:
- Always monitor the operational status of the fan to detect any anomalies early. After prolonged use, it’s important to clean the equipment, remove dust, and refill oil lubrication points.
- Inspect all fastening nuts to ensure they remain securely tightened, as loose components can lead to mechanical issues.
- During winter months, when there is a risk of snow or ice accumulation, keep the fan running intermittently to prevent blockages at the duct outlets.
Additional Considerations
Beyond the technical aspects, it’s vital to consider the environmental impact of the ventilation system. For instance, regular monitoring of noise levels ensures compliance with occupational safety standards. Additionally, periodic checks of the motor's operating temperature help identify potential overheating issues before they escalate.
In conclusion, maintaining a well-functioning blower system in a large pumping station requires attention to both technical details and practical operational procedures. By adhering to these guidelines, operators can ensure consistent performance while minimizing downtime and maintenance costs.
Pool Fountain
As large fountain manufacture in china,pool fountain is one of our main projections.The pool fountain has many modeling elements, including various Nozzles, underwater colored lights, and special pumps for fountains.The pool fountain have ultra-high spray,light, water curtain and music interweave show a spectacular side.
Pool Fountain,Solar Pool Fountain,Modern Pool Fountain,Swimming Pool Fountain
Wuxi Jinshanghua Environmental Equipment Co., Ltd , https://www.jshfountain.com