Small-volume, multi-variety stamping production is currently difficult to automate. The proper way is to use tools that are safe, labor intensive, and easy to use. At the same time, it is also possible to reform the positioning, ejection, and cleaning of the mold to make the operation safer. The main cause of stamping equipment accidents Most of the stamping equipment is mechanical transmission, which is characterized by fast stroke speed, several times to hundreds of times per minute. In the current mechanization and automation level, most of the stamping operations are also manually operated. The operator is prone to fatigue in the case of simple, frequent, and continuous repetition of work. Once the operation is wrong, the discharge is not allowed, the mold is displaced, and there may be accidents such as breaking fingers.
Main measures to prevent stamping injuries 1. Reform the process, mold and operation methods to achieve manual work. For high-volume production operations, mechanization and automation can be achieved by reforming processes and molds. For example, the use of automated, multi-station stamping machinery "target=_blank> mechanical equipment, the use of multi-tools and mechanized in and out of the production device, the use of continuous mold, composite mold and other combined process measures. All these can not only ensure the safety of stamping operations And can greatly improve production efficiency, which is the development direction of stamping technology.
Small-volume, multi-variety stamping production is currently difficult to automate. The proper way is to use tools that are safe, labor intensive, and easy to use. At the same time, it is also possible to reform the positioning, ejection, and cleaning of the mold to make the operation safer.
2. Renovate stamping equipment to improve production safety and reliability. At present, there are many unsafe factors in the control systems and electrical control systems of many old stamping equipment. If they continue to use the corresponding technical transformation. Stamping equipment manufacturers should improve product design to ensure the safety and reliability of stamping equipment.
3. Install the guard. Due to the small production volume, safety guards must be installed in stamping operations that are neither automated nor safe stamping tools to prevent injury accidents due to operational errors. All kinds of protective devices have their own different characteristics and scope of use. If they are used improperly, injury accidents will still occur. Therefore, it is necessary to clarify the role of various protective devices in order to ensure proper operation and ensure safe operation.
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Fence In Rolls,including Euro Fence ,Chain link fence,Welded Wire Mesh,Hexagonal Wire Netting,Hinge Joint Fence ,and Ornafence etc.
This quality results from the high-quality raw materials and the careful processing with the most modern production techniques.the surface treatment is electro galvanized, hot dipped galvanized or PVC,PE,PP coated.
Each roll packed in individual plastic foil with barcode label.
Standard colors: ZN or RAL 6005, other colors available on request.
They used for industry, agriculture, municipal, transportation, etc.
Fence In Rolls
Fence In Rolls,Wire Fence,Welded Wire Fence ,Hog Wire Fence
HeBei Fortune Trade Co.,Ltd. , https://www.gardfence.com