National Photovoltaic Engineering Technology Research Center officially passed the acceptance
Recently, the Ministry of Science and Technology issued the "Regulations on the Acceptance of the National Engineering Technology Research Center in 2013", and the "National Photovoltaic Engineering Technology Research Center" established by Jiangxi LDK LDK Company successfully passed the acceptance test and was officially named. This is the first national engineering technology research center in the domestic photovoltaic industry.
In October 2009, after screening a number of domestic leading PV companies, LDK finally stood out with a complete industrial chain, a strong technical team, perfect technical equipment and fruitful scientific research results, and was approved by the Ministry of Science and Technology to form “National Photovoltaic Engineering Technology Research Center, the construction period is 3 years. After more than three years of construction, the center has worked hard to overcome the impact of the downturn in the photovoltaic market, successfully completed the establishment and acceptance of various tasks, and has undertaken five national-level scientific research projects, 18 provincial-level scientific research projects, and more than 100 enterprise-recommended research and development projects. Formulated and participated in the formulation of 14 national and industry standards, and passed 10 certifications.
In September and November 2013, the Ministry of Science and Technology organized the acceptance committee to conduct on-site assessment and comprehensive evaluation and acceptance of the center. The experts of the acceptance committee agreed that the center has completed the feasibility study report and the various requirements required by the mission statement. The task has successfully achieved the expected set-up goals and met the acceptance criteria. As a result, the “National Photovoltaic Engineering Technology Research Center†was officially named and settled in Xinyu.
Sold Double Side Tape, Joint Wrap Tape, Inner Tape , Bitumen Tape in China.
Cold applied coating tape Composition:It is tape-shaped anticorrosion material made of Polyethylene film heat laminated with adhesive layer of butyl glue.
Usage: It is extensively used in the pipework of oil and natural gas transportation, petrochemical industry, electric power, metallurgy, urban natural gas network of pipes, the outside anticorrosion project of the metal pipes involved as well as the outside anticorrosion project of the underground and overhead metallic conduit of the works of petrochemical industry, natural gas and coal transportation
Thickness: 0.30 - 2.0 mm
Color : Black white
Other name: inner tape, cold wrap tape
Thickness :15 mil to 35 mil
Width: 50, 100, 150, 200, 300 mm
Length : 10, 20, 25, 30, 50,120 meter
Certificate :ISO 9001, ISO 14001,OHSMS 18001,SGS
Standard : ASTM D 1000, AWWA C 214
Temperature: 10 to 60 degree c
China professional manufacturer of Bitumen Tape, Inner Tape, Joint Wrap Tape, Double Side Tape. Welcome Purchasers from Worldwide to Visit Our Site.
Double Side Tape, Joint Wrap Tape, Inner Tape, Bitumen Tape
Jining Xunda Pipe Coating Materials Co.,Ltd , http://www.pipe-wrap.com