| Home>Bearing knowledge>Analysis: FAG bearing storage method |
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";
Analysis: FAG bearing storage method
Source: Bearing network time: 2014-10-07
| /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
1, only the relative humidity of the storage room does not exceed 60%; temperature changes are not large; fag bearings can be placed in the original packaging for several years.
2, sealed bearings or bearings with dust cover; after a long time of storage; the smoothness of the smooth grease filled in the bearing may be reduced. The storage room should also be sensational and rocking.
3. Fag bearings that are not stored in the original packaging should be kept in good condition; avoid corrosion and pollution.
4, large tumbling fag bearing can only be placed flat; the side of the inner and outer ring is the best supported.
5. If it is an upright storage; because the inner and outer rings and the rolling parts are heavier; the inner and outer ring walls are relatively relatively.
Recommend to friends comments close window
| Bearing related knowledge |
Angle touch ball bearing common sense to deal with "NSK bearing plus load failure damage discrimination" There are wonderful ways to prevent motor bearing rust. Imported bearings anti-rust handling is a sliding bearing?
|
This article links to http://
Please indicate China Bearing Network http://
Previous:New methods for quality control of heat treatment production process (2)
Next: IKO bearing equipment work after work to view the key
Monel alloy 400 has a specific gravity of 8.80,[5] a melting range of 1300-1350 °C, an electrical conductivity of approximately 34% IACS, and (in the annealed state) a hardness of 65 Rockwell B. Monel alloy 400 is notable for its toughness, which is maintained over a considerable range of temperatures.
Monel Flange
Monel Flange,Monel Blind Flange ,Monel Weld Neck Flanges,Monel K500 Flanges
Zhejiang Max Stainless Steel Co.,Ltd , https://www.cnstainlesstube.com