Ten tips for the maintenance of hardwood furniture

Jc001.load('iframe') JIFrame.create({ 'url' : '/go.php?action=ads&iframeHeight=250&isIframe=1&key=%BC%D2%BE%DF&pos_id=jc001_news_detail_30&reqkey=1&style=margin%3A15px+15px+ 25px+0%3B+height%3A255px%3Bwidth%3A255px%3B+float%3Aleft%3B', 'height' : 250 })

With yellow pear, red sandalwood, mahogany, chicken wing wood, rosewood, etc., if the use of reasonable protection, in principle can be passed on from generation to generation for long-term use, maintenance methods are:

First, there are two kinds of traditional, the traditional surface has no paint layer, just hot wax. The newly produced surface is now protected by a large lacquer or varnish. There are differences in the maintenance methods for different treatments.

Second, there is water in the hardwood, the air will shrink when the humidity is too low, and it will expand when it is too high. Generally, there is a shrinking layer when it is produced, but it should be taken careless when using it. Do not place it in a place that is too humid or too dry, such as near high temperature and high heat such as stove heating, or too humid in the basement to avoid mildew and Dry cracking, etc.

3. If the house is in a low-rise house, the floor should be properly padded if it is wet, otherwise the leg will be easily corroded by moisture.

4. When handling or moving furniture, it should be handled lightly, and hard to pull hard, so as not to damage the structure. Tables and chairs can not be raised, easy to fall off, should be lifted from the table and the chair, the cabinet is best to remove the door and then lift, can reduce the weight, but also avoid the door activity. If you need to move a particularly heavy piece of furniture, use a soft rope to pull it under the furniture chassis and lift it.

Fifth, the furniture surface avoids placing too heavy items for a long time, especially TVs, fish tanks, etc., which will deform the furniture. Non-breathable materials such as plastic sheets should not be placed on the table.

Sixth, the room is not flat, the length of time will lead to furniture deformation, the way to avoid is to use a small piece of wood to level.

Seven, absolutely no wet rags or rough rags, especially old furniture. Use a clean, soft cotton cloth, add a little furniture wax or walnut oil after a while, and gently rub back and forth along the wood grain.

8. The surface of the furniture should be protected from rubbing with hard objects to avoid damage to the surface of the paint and the surface of the wood. For example, when placing decorative items such as porcelain bronzes, be careful. It is best to use a soft cloth.

Nine, avoid placing the furniture in front of the large glass window facing south. The long-term direct sunlight will make the furniture too dry and fade.

Ten, hot water cups, etc. can not be placed directly on the surface of the furniture, leaving traces that are not easy to remove. Color liquids, such as ink, should never be scattered on the table.  

Black Silicon Carbide

Black Silicon Carbide,Silicon Carbide,Sic Silicon Carbide,Dry Silicon Carbide

ningxia hexing carbon based materials co.ltd , https://www.hexingsicmanufacture.com