Sealing characteristics of hot oil pump
The hot oil pump is an ideal hot oil circulation pump or a heat carrier pump, which is an ideal matching pump for heat exchange equipment. The magnetic drive non-leakage heat transfer oil pump improves the sealing process based on the original pump. The non-leakage high temperature magnetic seal is used to make the heat transfer oil pump have no leakage for life. The motor shaft and the heat transfer oil pump pump shaft have no contact and no friction, so the heat transfer oil pump is more normal in operation. The heat transfer oil pump has much lower noise, more stable and longer service life, which eliminates the phenomenon of running, running, dripping and leaking of the heat transfer oil pump. The same temperature can be used up to 450 ° C.
Structural features:
The heat-conducting oil pump adopts self-heating heat-dissipating structure, which changes the traditional water-cooling structure, makes the structure simple, small in size, saves operating cost, has good performance and reliable use. It is the second generation product developed on the basis of digesting and absorbing foreign oil pump in China. The structure is a single-stage single-suction cantilever type foot support structure, the inlet of the pump is axially sucked, the outlet is centered vertically upward, and the motor is mounted on the base.
The support of the heat-conducting oil pump adopts the structure supported by the double-end ball bearing. The front end is lubricated with lubricating oil, the rear end is lubricated with grease, and the middle part has a guiding oil tube for observing the sealing condition and recovering the heat-conducting oil at any time.
The magnetic drive non-leakage heat transfer oil pump improves the sealing process based on the original pump. The non-leakage high temperature magnetic seal is used to make the heat transfer oil pump have no leakage for life. The motor shaft and the heat transfer oil pump pump shaft have no contact and no friction, so the heat transfer oil pump is more normal in operation. The heat transfer oil pump has much lower noise, more stable and longer service life, which eliminates the phenomenon of running, running, dripping and leaking of the heat transfer oil pump. The same temperature can be used to reach 500 ° C.
Hot oil pump sealing features:
In the form of a combination of packing seal and mechanical seal, the packing is sealed with high temperature resistant filler, which has good thermal adaptability, while the mechanical seal adopts hard alloy material with high mechanical strength and good wear resistance to ensure high temperature. Under sealing performance.
The use of imported polytetrafluoroethylene (PTFE) for lip sealing results in a leap in sealing performance, 25 times better reliability than rubber seals, and extremely high corrosion resistance.
Concerned about surprises
Label: Sealing characteristics of hot oil pump
Previous: Overview: Evaluation of Health and Comfort of LED Lighting Products Next: Use and Maintenance of Die Casting Machine
We can produce the carbon steel pipes according to the EN10210,EN10216 and EN10297 standards, Such as the S235JRH Steel Pipe,S275J0H steel pipe,S275J2H steel pipe,S355J0H steel pipe,S355J2H steel pipe,E355 steel pipe,P235GH steel pipe and P265GH steel pipe.
Yangzhou Chengde Steel Pipe (YC) has been growing to a leading large diameter seamless pipe manufacturer with production range Ø219 ~ Ø1750 mm in OD and wall thickness from 8 mm up to 150mm. The product covers coal power generation, Nuclear power, Oil and gas. Chengde group acquired investment cooperation from American Carlyle Group and PCC (Precision Castparts Corp., Fortune 500 enterprise of the world, majorly in Aerospace and Power industries) successively as her special marketing strategy and the excellence of the product cost performance.
YC has been granted a number of approval certificate by international institutions, such as ASME Nuclear pipe certificate, China Nuclear HAF certificate, 914mm Cylinder certificate, API monogram and certificate, ISO9001 by TUV NORD, ISO14001/OHSAS18001 by CQC, approvals from Shipping Classification Bureaus like DNV, RINA, ABS, Lloyd, GL, Bureau Veritas, and permit of exporting to Europe as PED 2014/68/EU and AD 2000 certificates for pressure pipes, CPD (Construction Products Directive), etc. and these certificates support the development of international sales market.
S355 Steel,En10297 Pipe,E355 Pipe,En 10297 Carbon Steel Pipe
YANGZHOU CHENGDE STEEL PIPE CO.,LTD , https://www.chengdepipe.com