1. High efficiency and energy saving: Compared with the same brightness, 3W LED energy-saving lamps consume 1 kWh for 333 hours, while ordinary 60W incandescent lamps consume 1 kWh for 17 hours, and ordinary 5W energy-saving lamps consume 1 kWh for 200 hours.
2, long life: semiconductor chip light, no filament, no glass bubble, not afraid of vibration, not easy to break, the service life can reach 50,000 hours (the average incandescent lamp life is only one thousand hours, the average energy-saving lamp life is only eight Thousand hours)
3, health: light health light contains less ultraviolet and infrared light, less radiation (normal light lines contain ultraviolet and infrared)
4, green and environmental protection: no harmful elements such as mercury and antimony, which is conducive to recycling, ordinary lamps contain elements such as mercury and lead.
5, protection of vision: DC drive, no stroboscopic (normal lights are AC drive, it will inevitably produce strobe)
6, high light efficiency: CREE company's laboratory maximum luminous efficiency has reached 260lm / W, and the market's single high-power LED has also broken through 100lm / W, made of LED energy-saving lamps, due to power efficiency loss, lampshade light Passing loss, the actual light efficiency is 60lm/W, while the incandescent lamp is only about 15lm/W, and the good quality energy-saving lamp is around 60lm/W, so in general, the LED energy-saving lighting effect is equal to or slightly better than the energy-saving lamp. . (May 2011 data)
7. High safety factor: required voltage and current are small, safety hazards are small, and dangerous places such as mines
8. Market potential: low voltage, DC power supply, battery, solar power supply, lack of electricity, less electricity in remote mountain areas and outdoor lighting.
Others Tee,Other Tee, CS Tee
Zhongyan Machinery Co., Ltd. , http://www.juhengflanges.com