To reduce costs, some of the inferior cabinets are merely superficially confusing consumers, and only the exposed plates are barely sealed. Due to the lack of equipment, some cabinets use hand-sealing or electric irons to heat the hand-sealed edge to handle the plates. Not only the edge-sealing process is poor, but the edge appearance is not smooth and has burrs, and in the short-term there are hidden dangers of degumming.
Symptom 1: Drawer "swallow" In a cabinet shop less than 50 square meters, there are three display cabinets in the store. A young guy who was busy plotting with a set of squares and pencils, saw a business door and immediately greeted with a smile. “Daddy looked at the cupboard wow?†A friend opened a drawer with his hand, obviously feeling that the drawing was not smooth, and the drawer was pulled out. Shake. Pushed twice more effortlessly, the drawer was finally shut.
Symptoms 2: Long "acne" paint surface went to a red paint cupboard next to the young man said enthusiastically: "We use imported paint, but also according to your color preferences, first make a color block for your reference. "Then he took out several blocks of different colors in the drawer and said, "This is for the customer." Friends found that the surface of the color block was woody and dull, and the color block was radiated obliquely under the light. The spots dotted with paint were visible to the naked eye. From the side of the whole cabinet, the door panels are not on one line at the front and back, and they buzz when the door is opened. The hinges are rusted and rusty. There are burrs around the holes on the side panels of the cabinet and the spacing is not uniform.
Symptom 3: The "variety" panel visited several other cabinet stores along the street and found many problems. Some cabinets have uneven edges and can even be seen on the side of the core; some cabinets collide with each other when the adjacent cabinet door is opened; some cabinets open with a pungent glue smell; some cabinets fire board A large mouth has been opened between the veneer and the core board... At the same time, a friend discovered that the price of these cabinets is only half or one third of the brand cabinets.
diagnostic result
Inferior hardware
Hinges are commonly used connection hardware for cabinet door panels. Poor quality hinges cost between 7 and 8 horns per pair, while hinged systems with damping systems cost up to tens of yuan per pair. Inferior hinges are generally welded by thin sheet metal, which causes the door to fall off due to poor load bearing. Poor hinge springs have poor elasticity and do not have resilience. They will lose their elasticity after a long time and the cabinet doors will not be closed. A good hinge uses a single stamping of the alloy, the surface is smooth, the plating thickness is not easy to rust, solid and strong, bearing capacity. The drawers of the cabinets are connected by slide rails. The poor quality slide rails can not only be pushed and pulled freely, but also due to the uneven bearing surface of the slide rails, resulting in unstable drawers.
Rough edge sealing
Formal edge seals should be well-sealed equipment and sealed with green plastic. All exposed surfaces of the board must be edge-sealed to control the release rate and quantity of free formaldehyde from the board and prevent moisture deformation of the board. In order to reduce costs, some of the inferior cabinets are merely superficially confusing consumers, and only the exposed plates are barely sealed. Due to the lack of equipment, some cabinets use hand-sealing or electric irons to heat the hand-sealed edge to handle the plates. Not only the edge-sealing process is poor, but the edge appearance is not smooth and has burrs, and in the short-term there are hidden dangers of degumming.
Plate shoddy cupboards are places where food is stored and stored. The quality of cabinet materials directly affects the safety and hygiene of food. GB18584-2001 "Limits for harmful substances in wood furniture for interior decoration and decoration materials" mandatory standards: formaldehyde ≤ 1.5mg / L, heavy metals soluble lead ≤ 90mg/kg, soluble cadmium ≤ 90mg/kg, soluble chromium ≤ 60mg/kg, soluble Mercury ≤ 60mg/kg. At present, a price for a cabinet particle board (1.22.4m) that complies with national standards is around 100 yuan, while that of low-grade particleboard is only 40 yuan/piece. In order to reduce costs, some cabinet cabinet makers used outdoor panels (plates used for outdoor decoration) as interior cabinets. The price of outdoor panels was about RMB 20, which did not meet the safety and environmental requirements of cabinets. As a result, in some cabinet shops, a pungent smell of glue was smelled when one door was opened. In order to cover up this odor, some cabinet shops often put some aromatic or air fresheners inside the cabinet to confuse the consumer's sense of smell.
Cabinets Cabinets Panels Doors prices Paint Interiors Formaldehyde Furniture Cabinets Doors Cabinets Doors Doors Chests of drawers
Aluminium Extrusion Profile
Xingqiu Aluminum Co., Ltd. , http://www.fsdoorsprofile.com