When renovating a bathroom, one of the key elements to consider is the design and installation of sanitary partitions. These partitions not only help maximize space but also add a stylish touch to the overall look. Choosing the right materials and following proper installation steps are essential for a durable and functional result. Let’s explore how to select the best materials and what steps are involved in installing a sanitary partition.
Choosing the Right Materials for Sanitary Partitions
The selection of materials for a sanitary partition should focus on practicality, safety, and aesthetics. Since bathrooms are prone to moisture, it's important to use waterproof and easy-to-clean materials throughout the space.
1. Floor Materials: The floor should be made of non-slip, water-resistant materials like granite or ceramic tiles. It should be slightly lower than the surrounding area—about 10–20 mm—to allow for proper drainage. A floor drain should be positioned 10 mm below the surface to ensure efficient water removal.
2. Wall Materials: Walls in the bathroom need to be resistant to moisture, mold, and corrosion. Tiles, marble, and mosaics are excellent choices as they are easy to clean and can be designed with various patterns. It's important to match the wall color with the floor material for a cohesive look.
3. Ceiling Materials: The ceiling is often affected by humidity, making it vulnerable to mold. Waterproof and heat-resistant materials such as acrylic panels or colorful molded aluminum sheets are ideal. These materials are not only durable but also provide good insulation. Acrylic ceilings are more affordable but may age faster, while aluminum ones are pricier but offer a wider range of colors and long-lasting performance. Other options include aluminum-plastic boards or calcium silicate boards, which are cost-effective and highly waterproof.
Installation Steps for Sanitary Partitions
Step 1: Install the Fixing Plate Find the correct position on the wall and mark the center line for the fixing plate. Drill holes into the wall and insert plastic sleeves before securing the plate with expansion screws.
Step 2: Install the Adjustment Base Mark the base position on the floor according to your design plan. Place the base about 20 cm away from the edge of the partition board and secure it in place.
Step 3: Install the Partition Board After setting up the fixing plate and base, place the partition board on the adjustment base and adjust its height so that it sits about 15 cm above the floor. Use a level to ensure it's even, then fix it securely with screws.
Step 4: Install the Lever Cut and install the lever according to the length of the partition. For straight sections, use joint sleeves and spring pieces to keep the connection tight. At corners, use an aluminum injection molding corner joint. Secure the ends with wall brackets and attach the lever to the top of the column using screws.
Step 5: Install the Column Fix the tie rod to the middle of the column using L-shaped brackets. Mark a vertical line on the wall, drill holes, and insert plastic plugs. Then secure the column to the wall, ensuring it is perfectly aligned with the ground.
Step 6: Install the Door Leaf Attach hinge seats or door stops to the column. Measure and install the corresponding number of hinges on the door leaf. Place the automatic return nylon seat in the hinge, adjust the position, and test the door to ensure it opens and closes smoothly.
By following these steps and choosing the right materials, you can create a stylish and functional bathroom with well-installed sanitary partitions. If you're looking for more detailed guidance, visit Groundhog Network for comprehensive information on bathroom renovation and partition installation. With the right approach, your bathroom will not only look great but also last for years to come.
Rectangle Chafing Dish,Rectangle Chafing Dishes,Rectangle Chafing Dish With Spring Legs,Mobile Table Ware
Shaoxing Biaoyi Hardware Products Co., Ltd. , https://www.byeob.com