Polymer Materials Science and Engineering 2003 Vol.19 Total Catalogue

Advances in the PC/SAN compatibility of the total catalogue in 2003 Zheng Yiquan, Yang Qi, Li Guangxian (Effects of 4-different decomposition methods on the decomposition behavior of polyethylene ZHANG Hao, MENG Linghui, HUANG Yudong (4-Atom Transfer Radical Polymerization in Synthetic Schedule) Applications in Structural Polymers Yuan Jinying (5-1) Factors Influencing the Performance of Aramid Fibers and Their Composite Materials and Improvement Methods Li Tongqi, Wang Chengyang (Research progress on 5-liquid crystal polymers and their in-situ composite materials Wang Honggang, Jian Ling Chang, Shengrong Yang (5-Reagents-Study of Starch Modified Water Treatment Agents Zhan Yali, Guo Shaohui, Lu Ronghu (Physical Properties of 5-Polypropylene Based Nanocomposites Lin Zhidan, Mai Kancheng (The copolymerization of 5-polar monomers with olefins Advances in Researches Xue Xinghua,Wang Haihua (Research progress in the preparation of 5-dispersed polymer microspheres Duan Haibao, Cai Yujie, Ding Xianfeng et al. (Research progress in the phase behavior of polymer blends under 5-shear field) Ouyang Wenbin , LI Guang-xian (5-Research progress on environmental-responsive controlled release switch membranes Li Yan, Yan Liangyin, Zhu Jiajun et al. (A new theoretical model of 5-polymer PTC materials Li Rongqun, Li , Miao Jinling et al. (Research progress on 5-polydimethylsiloxane-containing polyurethane (urea)) Quan Yiwu, Chen Qingmin, Yu Xuehai (6-New Developments in Polyester Cyclic Utilization Zhang Yihong, Xiang Hongwei, Yang Yong et al. (6) -Surface Coating Technology of Nanoparticles XING Wei, LI Shu-Fen (Development of 6-Core-Shell Latex Polymer Particle Morphology Theory ZHAO Ke, SUN Pei-Qin, LIU Da-Zhuang (6-A Novel Polymer-One Dendrimer That Should Be Emphasized) Guo Qingquan, Lin Shuying, Zhang Yousheng et al. (6-The main factors influencing the compatibility of polymers in polymer alloy membranes Gu Xiaozhen, Sun Benhui (6-Research Progress in Dynamic Rheology of Phase Behavior of Polymer Blends System) Jiang Sujun, Li Guangxian, Jia Xiangming Et al. (6-Research progress in the preparation of new composites using wood mesoporous structures Lu Canhui, Chen Xiao (Development of polymer-based nanocomposites prepared by 6-intercalation method) Wang Pinghua, Xu Guoyong (6-template method for the preparation of one-dimensional polymer nanomaterials Research Progress Xiong Shanxin, Wang Qi, Xia Hesheng (Research progress in synthesis, spinning, microphase structure and properties of 6-PBO fiber Li Jinhuan, Huang Yudong, Xu Hui (6-packed pervaporation membrane material) Selection and Preparation of Li Duo, Jiang Zhongyi (6- * Synthetic Experiments and Processes* Synthesis Reaction Kinetics of Polyethylene Dodecanediolate Wei Yinghui, Zhao Qingxiang, Wang Yudong et al (1-Styrene and 1-(2-) Study on the Copolymerization of Tert-Butyl Peroxyisopropyl)-3 Isopropenylbenzene Li Jian, Lin Mingde, Yu Qiang et al. (1-Synthesis and Properties of Polyurethanes with Temperature and pH Doubly Sensitive Hydrogels) Liu Xiaohua, Tang Liming , Synthesis and characterization of coal-tar pitch divinylbenzene COPNA resin LIN Qi-lang, LI Tie-hu, SHAN Ling et al. (Synthesis and photocrosslinking of 1-carboxymethylphenol epoxide acrylate) Yang Jianwen, Zeng Zhaohua, Zhang Yiping et al. Study on Acrylate Emulsion Modified by 1-V Methacryloxypropyltrimethoxysilane Gong Xingyu, Fan Xiaodong (1-Narrow Bandgap Conjugated Polymer-Polymerization | Pyrrole-2,5-Di(Ferrocene Methylene) ) Synthesis and Characterization Yan Wei, Wan Meixiang, Zhang Zhicheng, et al. (1-Carboxymethyl cellulose copolymerized with acrylic acid and acrylamide) Ma Fengguo, Song Yi, Duo Yingquan (1-polycondensate/addition polymer latex) Preparation science. Synthesis and Characterization of Core-Shell Polyurethane Acrylate Hybrid Emulsion Synthesis and Characterization of Block Thermotropic Liquid Crystalline Copolyesters with ET as Flexible Spacer Wang Jiufen, Jiang Liping, Zhou Haijun (1-starch poly(phenyl glycidyl ether) grafting Studies on the Synthesis Reaction of Copolymers Zhao Jingbo, Zhang Jingjun, Yang Wantai (1) The chemical synthesis of VC-MMA copolymers and the mechanical properties of their blends He Benqiao, Zhang Yuhong, Xiao Weidong et al. (2-liquefied modified MDI and butadiene rubber) Study on Synthetic Polyurethane Elastomers CAO Qi, LIU Pengsheng, ZHANG Hao (Preparation and Characterization of 2-Water Soluble Chitosan DUAN Ying-quan, CHEN Hao, LIANG Cai-yi et al. Preparation and Properties of 2-L-Lactide and Poly L-Lactic Acid , YIN Jingbo, GAO Zhanqun etc. Study on Plasma Copolymerization of 2-Pyrrole with Silicon-Containing Compounds Hou Zhongkai, Guang Jinmin Bo, Zhai Congcong (2) Synthesis of Higher Molecular Weight Polyacrylonitrile by Aqueous Suspension Polymerization Chen Hou, Zhang Wangxi, Wang Chengguo Et al. (2-MALEIC ANHYDRIDE AND STYRENE DUAL MONOLITHIAL GRAFT POLYPROPYLENE AND ITS APPLICATION Fang Zhiqi, Tang Longxiang, Liu Chunhua (2-liquid carboxyl-terminated butadiene rubber modified bismaleimide structural adhesive (I Wang Chao, Li Qili, Huang Yudong et al. (2-86) Graft copolymerization of modified starch with vinyl monomers SUN Jianping, MENG Lingjie, HU Youhui et al. (2-chitosan crown ether synthesis and structural characterization Peng Changhong, Yang Weijun, Tang Yutang Et al. (2) Synthesis and properties of hydrophobically modified cationic polymeric flocculant P (AM-DMDAAC-BA) Chen Hong, Zhang Xi, Liang Bing (2-97) Synthesis of Linear PEO Blocks Chen Guorong, Shi Pengfei , Bai Yongping (Research on the Kinetics of 2-AM/SA Reverse Microemulsion Polymerization Wang Desong, Luo Qingzhi, Zhu Xuewang et al. (Synthesis and performance study of 2-multilayer core-shell acrylate emulsion Guo Ruijun, Zhao Bin, et al. ( Influence of Copolymerization System of 2-Acrylonitrile and N-vinylpyrrolidone on Reactivity Ratio of Monomers Chen Hou, Wang Chengguo, Zhang Wangxi et al. (Effects of Catalysts for Polymerization of 3-Propylene Polymers on External Electron Donors... Zhong Chifeng, Gao Mingzhi, Mao Bingquan (75) ) Polymer Material Science and Engineering Curing Reaction Kinetics of Low Bromide Epoxy Resin Dicyandiamide System for Copper Clad Laminate Board Wang Xiaodong, Zhang Qiang (3) Factors influencing the grafting rate of PBg-SAN graft copolymer in ABS resin synthesis Tan Zhiyong, Zhang Ming Yao, Yang Haidong et al. (3) Novel synthesis method and characterization of 3-polyamic acid Qin Chuanxiang, Zhao Shilin, Qin Zhizhong (3-P(St/BA/DBMEA) Non-soap cationic latex particle size and morphology Zhang Jinzhi, Zou Qichao, Li Xiaoqin et al. Polymerization of 3-methacrylic acid trifluoroacetoxyethyl ester LI Yu-ting, ZHANG Wei, ZHANG Min et al. (Functionalization of 3-chloro-acetone copolymer resin Chen Hanjia, Shi Xuhua, Luo Chuqing et al. Preparation and Application Properties of 3-Esterified Modified Starch Sun Jianping , Wu Hongcai, Hu Youhui (Reversed-phase suspension synthesis and properties of 3-crosslinked polyacrylamides Zhang Zhengan, Lu Jianmei, Cheng Zhenping (3-(2-hydroxy-3-butoxy)propyl-hydroxypropyl chitosan SYNTHESIS AND STRUCTURAL CHARACTERISTICS GENG Wei-Ping, FAN Jin-Shi, YANG Xiu-Li et al (Effects of 3-Polymer Surfactant on Emulsion Polymerization of Styrene under Ultrasonic Irradiation ZHANG Jing-zhi, CAO Ya (3-D4/APAEDMS bulk copolymerization reaction mechanism LUO Zheng-hong, ZHAN Xiao-li, Chen Fengqiu et al. (Electrochemical properties of 3-L-cysteine ​​doped polyaniline materials Liu Changjiu, Jiang Jiqiong, Yan Hanming et al. (Synthesis, characterization and degradation of 3- aliphatic polyester amide copolymers) Qian Zhiyong, Li Sai, Li Cao Et al. (Polymerization of 3-terminal hydroxypolyisoprene Li Zaifeng, Wen Lirong, Xu Chunming (Mechanisms of homopolymerization and copolymerization under microwave irradiation) Jianmei Lu, Zhenghe Zhang, Jianfei Wu et al (3- Prepared with amphiphilic polymer Granular styrene-acrylic emulsion Guo Yu, Gu Guohua, Jiao Yanrong et al. (4-Synthesis and Properties of Boron-Containing Phenolic Resin BSP Du Yang, Ji Faxiang, Liu Zuliang et al. (4-Polymer Microfiltration Membrane Plasma Treatment Grafted on N-Isopropyl Alkyl acrylamide Huang Jian, Wang Xiaolin, Chen Xiuzhen, etc. (24-ATRP synthesis of PMMA4)-PS-PFx-14 triblock copolymer Li Yuting, Wang Yushan, Zhang Yan et al. (4-A novel radical polymerization-styrene- Synthesis and Characterization of Maleic Anhydride Random Copolymers WANG Jiu-Fen, ZHOU Hai-Jun, JIANG Li-Ping et al. (Kinetics of Initiation of Acrylic Acid in Acrylic Acid Initiated by 4-Nitrous Oxide GUO Da-Jian, WANG Lei, CHEN Hong-Chao (Synthesis of polyether-ester polyols by 4-ring polymerization) I) Synthesis and Characterization Wang Dongxian, Yan Maoqing, Wang Xinkui (4-68) Low isotactic polypropylene solid-phase grafting Tao Ying, Li Jian, Zhou Xixing (4 - semi-continuous PVAc/PBA core-shell emulsion polymerization apparent kinetics Zhao Ke Sun Peiqin, Liu Dazhuang (4-high single) Body Concentration Range Acrylamide Reverse Microemulsion Polymerization Wang Desong, Luo Qingzhi, et al. (4- Synthesis of Monodisperse Polymer Microparticles by SPG Membrane Emulsification Method Murray, Deng Aimin, Takami Tanemi (4-BA/AN/MA III) Metaemulsion Copolymerization and Characterization WANG Zheng-Hui, XIAO Yi-Zhi (Microwave Synthesis and Properties of 5-Dimethylaminoethyl Methacrylate) Lu Jianmei, Zhang Zhenqian, Li Najun et al. (5-SEBS Synthesis of Acrylic Graft Copolymers STRUCTURAL ANALYSIS AND STRUCTURAL ANALYSIS Liu Chengmei, Zheng Lunsheng, Tian Daying (Synthesis and Properties of 5-Nano-C60/C70 Acrylic Acid Copolymers) Liu Xiaoguo, Guan Wenchao, Li Xian (5-Polyethylene Irradiation Grafting System Addition of Metal Salts Effects of Technical Rates Jianhua Bian, Mingwu Wu, Ye Xia etc. Preparation and Crystallinity of 5-Amino Modified Polyesters Li Guang, Liu Lingyun, Zhuang Yi et al. (5-polyether ketone ketones containing naphthalene ring polyether ketone ether ketone Synthesis and Characterization of Ketone Random Copolymers CAI Ming-Zhong, XU Hai-Yun, LI Wei et al (Synthesis and Properties of 5 - Suspension Chlorinated Polyvinylidene Fluoride) Xu Weijian, Lu Binjili, Shao Guojun et al. (5-polymer-based metal gradient composite Electrochemical Behavior in Film Synthesis Liu Haiyan, Tang Jianguo Synthesis and Characterization of 5 - PET-HBT Thermotropic Liquid Crystal Block Copolyesters DU Li-li, WANG Jiu-fen, HUO Hong-xing (Synthesis of 5-unsaturated polyester epoxy resin block copolycondensation type photosensitive prepolymers Yi Jun, Li Zuobang ( Synthesis and Solution Properties of 5-Dimethyldiallyl Ammonium Chloride Acrylamide Copolymer Du Yang, Tian Liying, Ji Faxiang (5-86) Synthesis of an Optically Active Chiral Side Chain Liquid Crystalline Polymer Zhi Gongzhi Jun Ge, Zhang Baoyu, Liu Zuojun et al. (5-Synthesis and mechanism of COPNA resin with petroleum pitch as monomer Yan Yongli, He Li (5- Tk hydroxy polydimethylsiloxane and polystyrene blend) Preparation, Sulfurization and Mechanical Properties of Materials Dong Jian, Liu Zonglin (Synthesis and Characterization of 6-Star Polyacrylamide Flocculant Qian Jingwen, Wang Meng, Yang Shuyuan (6-solution polymerization polyacrylamide montmorillonite nanocomposites) Shi Tiexi, Wu Defeng, Wang Hualin et al. (6-Surface initiated polymerization preparative chromatographic stationary phase Liu Shujuan, Zhou Feng, Jiang Shengxiang et al. (Synthesis and performance of 6-nonionic polyurethane surfactants Shi Yuanchang, Wu Youshi, Zhang Li (6-polyquaternium) Salt and acrylamide Branch Polymerization Guo Lingxiang, Hao Xiaohong (Synthesis and properties of 6-copolymerized polyaniline) Ma Li, Tang Qi (6-Self-assembling particle size control of PEG-grafted polystyrene microspheres Zhang Ming, Chen Mingqing, Liu Xiaoya et al (6- Synthesis and Absorption Properties of Salt-Tolerant Acrylic Water Absorbing Resin Kang Hongmei, Xie Jianjun, Liu Yang (Study of 6-SEBS Melt Grafted Maleic Anhydride Xiong 6 Yan, Jiang Yaoming, Zhang Aimin (Polyacrylic Polysiloxane Prepared by 6-Miniemulsion Polymerization Method) Alkane Complex Emulsions Yu Qiqing, Ni Peihong, Li Jieai et al. (6-synthesis and properties of aromatic acid modified amideimide polyurethanes; Zuo Xiaobing; Jiang Xiqun; Yang Changzheng (6-2003) benzoyl peroxide styrene butyl acrylate Microemulsion Copolymerization Li Xueyan, Wang Desong, et al. (6- * Structure and properties *Imidazole-terminated chain extended urea modified epoxy resin E-51 anhydride MTHPA system performance He Shangjin, Shi Keyu, Wo Hua et al (1- new method synthesis PBMA-b-PSt Block Sulfonated Ionomer and Its Structure Characterization Liao Zhengfu, Zhao Jianqing, Shen Jiarui et al. (1-Poly(styrene-divinylbenzene)/Polyurethane Casting Adhesive Bonding Properties Meng Jiru, Liang Guozheng, Zhao Lei (1-Effects of Microwave Irradiation on the Crystal Structure of HDPE in Al/HDPE/Al Interfacial Layer He Qijia, Bao Jianjun, Zhang Aimin (Interactions of 1-PP PP compatibilizers with compatibilized PP/PA6 blends) And mechanical properties Li Yixin, Jia Demin (1) Study on the structural relationship of polycarboxylic acid comb-like copolymer hyperdispersants Gong Ruixin, Wang Luoli, Xiao Chuanjian et al. (1-Liquid Crystal Polymer for the compatibilization of PA1010 stone powder hybrid materials Studies on the Morphology and Ionic Conductivity of Low-polyether/Polyurethane Solid Electrolyte Zeng Laixiang, Wang Xinling, Tang Xiaozhen (Studies on the crystallization behavior of 1-different end groups and molecular weight polyoxyethylene) Yuan Jianjun, Xu Zushun, Cheng Shiyuan (1) Dielectric Properties of PVDF-Modified BaTi3 Composite Xiong Chuanxi, Dong Lijie, Chen Juan et al. (1-Influence of Surfactants on the Performance of Polyaniline Electrorheological Subsidients) Su Shi, Li Xiu-Qiao, Yan Xiong-Wei et al. (1-Nucleator) Effects of Crystal Morphology and Impact Fracture Behavior on Polypropylene XU Tao, LEI Hua (1-160) Effect of Electron Beam Irradiation on HDPE/PA6 Blend System LIAN Tiejun, XU Wen, LIU Pengbo et al. (1-CaC3 Particle Gradient Filler for PP Sex Effect of Structure and Energy on Structure and Structure Zhang Jun, Cheng Jiang, Hu Baixing et al. (1-Study on interaction damage of polystyrene under combined fatigue and fatigue effects Song Zhimin, Huang Xiaoxia, Liu Minzhi et al. (1-Nylon 6 melted with tribasic acid as modifier) Behavioral Research Dai Lixing, Huang Nanxun, Tang Zhilian (Mechanical Behaviour of 1-T-ZnO Whisker Reinforced Epoxy Composites) Chen Erfan, Tian Yajuan, Zhou Benlian (Microstructure and mechanical properties of 2-polyethylene attapulgite nanocomposites Sheng Yu, Du Zhongjie , Rong Junfeng etc. Study on the Curing and Mechanical Properties of 2-reactive Liquid Crystalline Polymer and Epoxy Resin Wei Chun, Liu Minna, Wang Xiayu (2) Structure and Properties of In-situ Formed FPP Coupling Al(OH)3/PP Composites Mai Kancheng, Li Zhengjun, Zhai Zheng et al (Crystal structure analysis of 2-starch and PE hybrid fiber Qi Lu, Li Heyu, Zhou Xiaokai et al. (2-D) Enhanced PVC/POE Thermoplastic Elastomer Properties Wang Jikui, Cheng Shujun, Dai Ganze (2-Chloride STUDY OF THE THERMAL AND DYNAMIC MECHANICAL PROPERTIES OF POLYETHYLENE GRAFT COPOLYMERS DING Yunsheng, SHI Tiexi, ZHANG Zhicheng (Dielectric properties and microstructure of 2-PP/PA-6 polymer blends (I) Xiu Sheng, Yu Demei (2-138) PP/PA-6 Polymer Blends Dielectric Properties and Microstructures () Zhou Wanxuan, Guo Xiexue, Yu Demei et al (2-142) Low Charge Density Amphiphilic Polymers Preliminary Study on Flocculation Mechanism of Flocculants YU Qian-Ping, HUANG Rong-Hua, MA Jun-Tao (The Tribological Properties of Nylon Ion Implanted Nylon 1010) XIONG Dang-Sheng (2-Different Initiators Initiate the Surface Structure of Maleic Anhydride Grafted SBS Before and After Heat Treatment Cao Xuejuan, Li Chao , ZHANG Aimin (Research on rheological properties and mechanical properties of 2-hyperbranched poly(amidoester)/PVC blends ZHAO Bao-hui, BA Xin-wu, HOU Wen-long et al. (Effect of 2-nanometer particle size on optical properties of PMMA-based composites Qian Zhiyong, Zhai Zhiting, Cui Jianguo et al (Effects of 2-V irradiation on positron annihilation characteristics of PE Jia Shaojin, Zhang Zhicheng, Fan Yangmei et al. (2) Study on the effect of superfine calcium carbonate on the environment-reducing performance of PE plastics Chen Qinghua (2) Study on the Alcohol Retardant and Conductive Properties of Polyvinyl Alcohol Films (I) Wu Hong, Wang Yuxin, Wang Shichang (2-172) Effect of hard segment model compounds on polyurethane solid electrolytes Zhu Weihua, Yang Bing, Wang Xinling et al. Female-reinforced U-shaped polypropylene XU Wei-bing, WANG Hao (3 - ABS permanent antistatic alloy Chen Erfan, Zhao Changli, Cheng Yuanjie etc. (3 - Nylon 6/maleic anhydride-styrene multi-monomers grafted polypropylene reactive blends Xie Xuming, Li Ying, Yang Xun (3-liquid carboxyl-terminated butadiene rubber modified bismaleimide structural adhesive () Wang Chao, Huang Yudong, Zhang Bin et al. (3-145) Amino silicone oil modified epoxy grouting material morphology And Properties Zhang Bin, Liu Wei District (3 - PMMA-PET blend system rheological properties Chen Lei, Yu Aifang, Hu Zuming, etc. (3-miPP/iPP blend system flow performance Zhu Meifang, Xing Qiang, Wu Wenhua, etc. (4- Effect of Residual Solvent DMSO on the Structure and Thermal Properties of PAN Fibers LI Chang-qing, XU Liang-hua, WANG Xiao-ling et al. (Crystalline Behavior and Crystallization Kinetics of 4-PBT/BA-MMA-AA Terpolymer Blends Wang Xiaodong, Zhang Qiang (4-Phenylbenzene) Crystallization Behavior of Ethylene Dicarboxylate Ethylene Oxide Multiblock Copolymers Zhang Xiaoyun, Luo Yulie, Ma Dezhu (Dynamic mechanical analysis of 4-melt-spinning spandex Chen Dajun, Yang Taofeng, Li Yaojun (Mechanical properties of 4-TPE Li Xinfa, Niu Mingjun) , Chen Jinzhou et al. (4-103) Low Replacement Adhesion Properties of Carboxymethyl Starch to Fibers Zhu Zhifeng, Gu Guoxing, Kang Cuizhen (Effects of 4 - HDPE grafted MMA and its grafted materials on British powder filling system Fu Lan, Zhou Wei, Xu Wen et al. (4-Polyvinyl chloride) Physical aging behavior above the glass transition temperature Wang Yaming, Shi Jun, Shen Changyu et al. (Phosphate behavior and mechanical properties of polypropylene under the action of 4-organophosphorus nucleating agent Gui Quande, Xin Zhong (4-crystallization accelerator and nucleation) Effect of Agents on the Crystallization Property of PET Guo Renyi, Chou Dafu, Lu Hong et al. (Performance of New Low-density Polyethylene/Polyaniline-phosphazene Composites Chen Donghua, Cui Yanjun, Tang Xiaozhen (4-reactive liquid crystal compound modified epoxy) Resin properties Wei Chun, Tan Songting, Liu Minna, etc. (4-reinforced rigid polyurethane foam compressive failure behavior... Secret... u+......... Zhu Haijing 'gse Wei' Yang Xiaobo et al. (4-Polymer Science and Engineering Segregation Study on Mechanical Properties and Sub-microphase States of Toughened Polyformaldehyde System WANG Xiao-Dong, ZHANG Qiang, CUI Xiu-Guo (Preparation and Properties of 5-Polysodium Polyacrylate Absorbent Resin/Polyvinyl Alcohol Perchloric Acid Lithium Polyelectrolyte) LI Shu-She, SHAO Shui-Yuan, YAN Lan-Ying Et al. Rheological Behaviour and Mechanical Properties of 5-Hydro-High Density Polyethylene High-Performance Polyethylene Blends Yu Mao-Sheng, Gao Jun-Gang, Yan Ming-Tao (Effects of 5-Interface on the Hygroscopic Behavior of 3D Braided Composites Chen Guicai, Wang Yulin, et al. , Wan Yi, etc. (5-PVC grafted polydimethylsiloxane Liu Zonglin, Wang Qin, Dong Jian et al. (5-Amphiphilic graft copolymer PMMA~g-PEO and PS~g-PEO in toluene Comparison of the properties of the medium solution Chen Yongchun, Chen Chao, Cao Hongyan et al. (5) Photodegradation of LDPE film induced by a new photodegrader, strontium stearate (W) Yu Faquan, Yao Shuren (5-montmorillonite and flame retardant) Synergistic effect HAO Xiangyang, LIU Jiping, FENG Shunshan (5-polyether extended urea toughened epoxy resin double cyanide diamine curing system Shi Keyu, Li Zanning, He Shangjin et al. (5-polyvinyl alcohol film hindered alcohol and conductive properties () Glutaraldehyde cross-linked polyvinyl alcohol films Wu Hong, Wang Yuxin, Wang Shichang (5-131) The thermal decomposition behavior of macromolecules with peroxy-bond pendant radicals Yu Qiang, Lin Mingde, Li Jian (5-polyamide/polyphenylene) Study on Tribological Properties of Thioether Blends (I) Dry Friction Chen Zhaobin, Li Tongsheng, Yang Yuliang et al(6-104) Polyamide Study on Tribological Properties of Poly(phenylene sulfide) Blends() Water Lubrication Chen Zhaobin, Li Tongsheng, Yang Yuliang et al. (6-108) Tribological properties of liquid crystal polyaramide self-assembled films Wang Haijun, Wang Qihua, Yan Xianqiang (6-polypropylene grafting) Crystallization Behavior of Crosslinked Compounds ZHANG Guang-Ping, YU Jian-Yong, WANG Shan-Yuan (Preparation and Properties of 6-Nano-Zinc Oxide Modified Vulcan Rubber Rubber Composites Wang Yihui, Zhang Ping, Wang Shengle et al. (6-PP~g-MAH Montmorillonite Nanoparticles) Preparation and Properties of Composites XU Wei-Bing, LIANG Guo-Dong Characterization and Heat Resistance of 6-AM-STD-NaAMPS Ternary Hydrophobically Associating Copolymers Zhong Chuanrong, Huang Ronghua, Zhang Xi et al (6-MBS and SBS Synergistic Toughening SMA Lacquer Dynamic Mechanical Properties of Urushiol Metal Polymers Hu Binghuan, Lin Jinhuo, Xu Chen et al. (Mechanical Properties and Fracture Morphology of 6-AS/ABS/CPE Blends System Tie Wei, Xu Wei, Hao Wentao et al (Study on weather resistance of 6-polypropylene) Hu Xingjun (Structural morphology and properties of 6-nanometer CaC3/PVC composites Zeng Xiaofei, Chen Jianfeng, Wang Guoquan (The network structure and properties of 6-high oil-absorbing resin Yin Guoqiang, Cui Yingde, Liao Lewen et al. (6- LDPE environmental stress cracking) Research Li Qiaojuan, Xie Darong (6- * Analytical testing, processing, application * FT-IR study on the curing behavior of polyurethanes Wen Qingzhen, Zou Qichao, Zhu Jinhua, etc. (1) The mechanical properties of PVA blown film Li Li, Wang Qi , Wang Ru et al. (Study on Synthesis and Rheological Behavior of 1-Ultraviolet Curable Polyurethane Acrylate Resins Shi Xiang, Xu Dongmei, Yan Min et al. (1-GMT flow forming fiber orientation study Zhang Guangping, Dai Ganze (1-high impact polystyrene) Strain Rate Sensitivity and Viscoplastic Constitutive Relations CAI Chang'an, YU Jie, LUO Zhu, et al. (1 MPE/LLDPE/LDPE blend melt rheology Sui Mingtao, Gao Jungang, Li Zhiting et al. (1-free volume Application and Correction of Theory in Polyurethane Doped Salt System Fang Bin, Wang Xinling, Tang Xiaozhen (XPS Study on the Surface of Fibers in the Process of Carbonization of Polyacrylonitrile Fibers Kou Kejun, Wang Xin, Zhang Futao et al. (1-Fourier Infrared Spectroscopy Study of Cyanide Curing Reactions of Ester Resins and Their Modified Systems Meng Jiru, Liang Guozheng, Zhao Lei (2-Sulfur-containing Polyimide Membrane for Pervaporation Separation of Benzene Cyclohexane Mixtures Xu Liwen, Yang Liming, Wang Yuling et al. (2-way pull) stretch Analysis of Stress and Strain Curves of Polyethylene Films YU Fu-qiang (Research on Characterization of Interfacial Interaction and Tensile Fracture Morphology in 2-PP/POE/BaSO4 Blend System LI Zhen, GUO Shao-yun, SONG Wen-biao (2-Interaction Interaction for Nylon 6/SEBS Blends) Influence of the rheological behavior of the system Cheng Hao, Jiang Yaoming, Guo Yan et al. (3 - Gas-assisted injection molding and CAE analysis of filling process Wang Lixia, Shen Changyu, Li Qian et al. (The thermal behavior of 3-polycarbonate, Du Zhenxia, ​​Rao Guoquan, Nan Ai Ling et al (3-DSC study of the crystallization behavior of in-situ polymerized polyethylene attapulgite nanocomposites Sheng Ji, Du Zhongjie, Rong Junfeng et al. (Structure characterization of 3-layered bishydroxyhydroxide and thermal stability of PVC) Effects of Hua Youqing and Qin Qian (Application of 3-partial dithio-polyaniline electrode material in lithium batteries Tang Zhiyuan, Xu Guoxiang (Tega/XPS two-pronged joint of APP/PER intumescent flame retardant synergistic effect on 3-4A molecular sieves) Properties of PMMA~g-PEO Solution of Branch Copolymers and Its Application in Inverse Emulsion Polymerization Chen Yongchun, Cheng Shiyuan, Chen Chao et al. (Specification and application of the Mark-Houwink equation KT for 3-segmented polystyrene) Liu Wei, Li Bojun, Shen Yu etc. (3-border Effect of Interaction on Rheological Behavior of Nylon 6/SEBS Blends Cheng Yu, Jiang Yaoming, Guo Yan et al. (3-gas-assisted injection molding and CAE analysis of filling process Wang Lixia, Shen Changyu, Li Qian et al. (3-Polycarbonate) The thermal behaviors of Du Zhenxia, ​​Rao Guoxuan, Nan Ailing, et al. (3-DSC method for the crystallization behavior of in-situ polymerized polyethylene attapulgite nanocomposites Sheng Ji, Du Zhongjie, Rong Junfeng et al. (3-layered bishydroxyhydroxides) Structural characterization and thermal stabilization of PVC Hua Youqing, Qin Qian (Application of 3-dithiothioaniline electrode materials in Lithium batteries Tang Zhiyuan, Xu Guoxiang (3/4A Zeolite for APP/PER Intumescent Flame Retardant The Properties of the Synergistic TGA/XPS Amphiphilic Graft Copolymer PMMA~g-PEO Solution and Its Application in Inverse Emulsion Polymerization Chen Yongchun, Cheng Shiyuan, Chen Chao et al (Mark-Houwink equation of 3-segmental polystyrene Determination and application of KT Liu Wei, Li Bojun, Shen Yi et al (Effects of 3-PP on the rheological properties of UHMWPE processing Liu Gongde, Li Huilin (In situ simultaneous toughening of 4-unsaturated polyester resin) Research on Falling Shrinkage Yang Rui, Pan Anhui, Zhao Qi (4- with ds (the hot side of the storage stability of the modified asphalt system ...... ai .... Secret legs...

PTV properties of several CPP resins in 2003. Molecular interactions and thermal properties of chlorinated polypropylene/polyurethane blends Film formation and properties of polyurethane polyacrylate emulsions Polymer concentration for crosslinked polymer cluster size Preparation and Performance of Methyl Methacrylate-Maleic Anhydride Copolymer/Si2 Hybrid Materials Synthesis and Characterization of Carbon Dioxide and Epichlorohydrin Copolymers Reaction Processing System Thermal and Mechanical Properties of PVC/PHMS Different Quality PET Chips Non-isothermal crystallization kinetics Direct synthesis of polylactic acid and its application to erythromycin lung targeting drug microspheres Phase transition behavior of polyethylene glycol diacetate cellulose blends Quaternary ammonium salt type cationic chitooligosaccharides Surface activity The phase diagram of the agent and the relationship between the melt flow rate and temperature of the microemulsion structure are discussed. The influence of La(I) complex on the rheological properties of LLDPE processing The effect of extrusion temperature on the morphological structure and properties of the biaxially self-reinforced HDPE sheet.

Preparation of GEP/PO In-situ Fibrillation Blends Non-isothermal Crystallization Kinetics of Nano-CaC3 Filled Polypropylene Polyvinylalcohol Sodium Alginate Composite Hydrogels Preparation and Electric Field Response Properties Preparation of Doped Polyaniline Conductive Films Decontamination of uranium on the surface of nuclear facilities Solid extrusion behavior and mechanical properties of metallocene polyethylene PET/PBT reactive crystallization behavior CaC3 gradation filled PP morphology and non-isothermal crystallization kinetics Study of montmorillonite filling Isothermal Crystallization Kinetics of Polypropylene The Combustion Mechanism of Poly(methyl methacrylate) at Rapid Temperature Rising Phase Transformation Behavior and Molecular Interaction of Polyethylene Glycol Chitosan Complex Peroxide Pre-vulcanization Natural Rubber Latex Vulcanization Process Latex Film Thermal Analysis of Twin-Screw Forced Lubricated Extruded LHMWPE Sheets * New Technologies and Product Development * PP Non-woven Graft NVP Study of PVA/PBA Latex Interpenetrating Polymer Network Damping Materials Sol-Gel and In-Situ Polymerization Preparation of well-dispersed nanohybrid materials modified by poly(ethylene glycol) glycidyl ether for the modification of silk fibroin films Polyether urethane ionized polyether cationic solid electrolytes Study on in-situ polymerization Study on Properties of Organic-inorganic Polyolefin Nanocomposites Modified Liquid Crystal Polymer Modified Epoxy Resin New Type sPS/PET/SsPS-K Properties and Characterization of Engineering Plastics Silicone Modified Poly(Propylene Carbonate) Degradable Polyamide Fractures Research and Development of HAP-coated Lithium Ion Battery Membrane on the Surface of Internal Fixing Materials Research on the Biodegradable Materials Based on Bagasse (Part I Study on the Water-Based System of Extended Chain Light-curing Urethane Acrylates Preparation of biodegradable polyglutamic acid superabsorbent polymer Preparation and properties of the oil-swelling rubber Synthesis of novel hyperbranched polymethylol ether liquid crystals Reversed microemulsion template in-situ polymerization Preparation and characterization of nano-AgCl/PMMA composites Study on the isothermal crystallization kinetics of polymethylenimine modified nylon 6 composites based on environmental friendly materials of corn cobs (I mechanism of carbon nanotubes reinforced PA6 composites new water developing photosensitive Resin Properties Crosslinked Chitosan Resin Immobilized U-Cyclodextrin Under Microwave Irradiation

Tribological properties of nano-TiO2 filled polyethersulfone ketone composites Co-polyamide reinforced thermoplastic starch materials Yuan Qiang, Zhang Ying, Yang Jian et al (4-148) Zhang Jun, Cheng Jiang, Hu Baixing, Ren Jun et al (6-175 ) Polymer Materials Science and Engineering 2003 Head Office Polymer Materials Science and Engineering 2003 Head Office Polymer Materials Science and Engineering 2003 Head Office Polymer Materials Science and Engineering 2003 Head Office Polymer Materials Science and Engineering 2003 Effects of additives on the mechanical properties of deacetyl konjac glucomannan films Effects of doping of alkoxylated rare earths on the impact properties of polystyrene Polypropylene hydrolysates Preparation and characterization Rare earth doped polyurethane photocurable coatings Preparation and Performance of Conversion Membrane Based on the Study of Environmentally Friendly Materials of Corn Cobs (KGM Blended Membrane and Its Water Barrier Property) Preparation and Performance of Polypyrrole montmorillonite Composites Preparation by Magnetron Irradiation Method Waterproof and moisture-permeable fabric Nano-Ce2 Long-sized ionic polyurethane composites Hydroxybutyric acid phthalate copolymers for bone tissue engineering Bioactive glass composite porous scaffold materials Containing amphiphilic PEO Preparation and characterization of water-absorption swelling rubber of 4-PBA compatibilizer Preparation and characterization of high density polyethylene and radiation-limiting cross-linking of high density polyethylene modified silane cross-linked UHMW-PE modified methacrylate/SiO2-TiO2 nanocomposites Photoelectrochemical Behavior of Sensitizer-Modified Nanocrystalline TiO2 Porous Membrane Electrode Fluorine-carbon Polymer Membrane with Double-Nano Three-Dimensional Network Structure of Particles Polyimide Preparation and Pervaporation Performance of Nanoparticles Surface Modification and Modification of Nanoparticles Preparation of Novel Biodegradable Antibacterial Polyurethane Materials by Surface Graft Polymerization of SO2 Nanoparticles Preparation of Organic Titania Hybrid Material by Sol-Gel Method Preparation of Nano-TiO2 and MMA Electron Radiation Graft Polybutyl Methacrylate-Silica Hybrid Materials Properties and Performance Diazo Resin Phosphorylated Polyvinyl Alcohol Photosensitive Self-Assembled Ultrathin Film Ferrofluid Magnetic Hydrothermal Synthesis of Microwave Surface Modification and Preparation of Magnetic Polymer Microspheres PVP Plastic Interface Layer Effects on the Properties of CF/VE Composites Polyurethane/ Preparation and Properties of Zeolite Hybrid Materials Glycidyl Methacrylate-styrene Multi-units Melt-grafting Microporous Polypropylene Polyethylene Dispersion Study on the Phase Behavior of Polymer-dispersed Polypropylene Flame-retarded Polypropylene Flame-retardant Polypropylene Modified Polypropylene Copolymers by Phase Copolymers RTM Molded Composites Interface Modification Water-soluble Polymer Molecular Design and New Methods for Solvent Selection Preparation of Molecularly Imprinted Polymer Membrane Glucomannan Composite Biomaterials by Chemical Method Preparation and Synergistic Effect of Inorganic Composite Particles/Polypropylene Composites* Teaching Discussion*Microwave Synthesis of Starch Grafted Acrylonitrile Absorbent Resins*News*Solid phase force Study on In-situ IR Spectra of Poly(Vinyl Chloride) Microcrystalline Structure Prepared by Intumescent Flame Retardant Prepared by Chemical Method----In-situ Infrared Spectroscopy of Poly(vinyl chloride)----Chen Yan,Lin Xiaoyan,Luo Xuegang(3- 216)... Zhang Wengong,Lin Meijuan,Wang Wen( 3-220) Li Liuzhong, Yu Yuanzhang, Li Yonghua et al (4-169)-Huang Duo, Zhou Shuhua, Liu Jian, etc. (4-173)... Ge Jinjie, Zhang Zhinan, Xu Jiangtao (4-177)... Tang Yupei, Du Yumin, Fan Lihong (4-181)-Zhao Jinling, Wang Lixin, Ren Li et al (4-185)-Sun Yinjie, Ma Lin, Qi Hongjin (4-188)...... Liu Guixia, Sun Duixian, Hong Guangyan (4- 192)-Ren Yaobin, Zheng Dong, Wang Yingjun, etc. (4-196)- Wang Caiqi, Dong Yuping, Zhang Guo, etc. (4-200)-Lu Haijun, Ma Mingyan, Zhu Guangming, etc. (4-204)... Xie Xiaolin, Wu Xuecheng, Deng Zexian (4-208) -Du Nayin, Yang Zhizhong, Tang Kangtai, etc. (4-212)-Liu Yusheng, Yang Maizhi, Yan Xiaohua, etc. (5- - Wang Yuling, Zhang Chuanwei, Ling Wenkai, etc. (5-180)... Wang Pinghua, Yan Manqing, Tang Longxiang (5-183)- Ge Jinjie, Cai Meiqin, Shi Xinghai et al (5-187)-... Zhang Daohong, Liu Chuanjun, Wu Yiyao (5-191)-Zu Xiaotao, Xiang Xia, Jiang Bo et al (5-194) Zhang Qiwei, Zhang Yonghua, Chen Shouming et al. (5-197) Li Qi, Ouyang Yuhua, Chen Jinyu, etc. (5-...Yu Yunhua, Wang Chengzhong, Yang Xiaoping (5-208)-Lu Zhiping, Yuan Xiaofang, Yang Ruguo et al. (5-212)-Zhang Yuqing, Zhao Ma , Lin Zhihui et al. (5- - Yu Tianshi, Lin Jiaping, Zhang Wenjie et al. (6-202)... Qin Wei, Zhang Zhiqian, Wu Xiaohong (6-206)... Tang Linsheng, Zhang Shufen, Yang Jinzong (6- 209) Shi Ruixue, Guo Chenghai, Zhang Dong Jiang et al (6-213)-Pang Jie, Zhang Tongsheng, Kang Binbin et al (6- 216)... Chen Deliang, Yang Huaming, Gao Wei (6-220)... Huang Mingde, Wang Hai, Wang Haiming (2-...Chen Yinghong, Wang Qi, Liu Yuan (4-

Our safety lockout tagout padlock is made from reinforced nylon body and triple-coated hardened steel shackle. The lockout padlock is widely used in chemical, electrical, automobile industry, etc. Easily to be carried with rewritable warning signs. Labels can be custom made.Padlocks are an essential starting point of any lockout procedure.The safety integrity of the lockout lies with the Padlock.It is essential to ensure that the padlock can only be removed by the person who applied it or, in their absence, an authorised supervisor.
REGISTER KEY SYSTEM:

It is important that each employee at a site has a unique padlock key to help prevent duplicate keys from jeopardizing your lockout program. We promise to use different key and numbering for each order if required. Besides each key can be recorded in our programming system so that you can reorder the same key whenever necessary.




steel shackle padlock

steel shackle padlock

Steel Shackle Padlock

Steel Shackle Padlock,Steel Padlock,Hardened Steel Shackle Padlock,Thermoplastic Safety Padlock

Lockey Safety Products Co., Ltd. , https://www.lotolockey.com