Three-roll gates, swing gates and wing gates are used more and more frequently in our daily life. Different gates are used in different occasions. How to maintain three-roll gates, swing gates, and wing gates are responsible and obligatory as manufacturers. Discuss with everyone. The previous article discussed "How to Maintain the Three Roller Gates (Three Stick Gates)". Here we will discuss with you how to maintain the swing gates and the wing gates. The maintenance of the swing gate and wing gate is basically the same as the maintenance of the triple roller gate, but the structural principles are different and the maintenance is somewhat different. The following points need attention:
one. Chassis maintenance and care
The gate of the swing gate and the wing gate is sprayed or painted with No. 304 stainless steel and electrolytic plate (A3 plate). The stainless steel case has a rust spot for a long time. Clean the chassis with sandpaper, green gauze and fossil powder, and the sanding surface is long. Wiping (protecting the direction of thick grain lines) will otherwise affect the appearance. The mirror surface is polished with a polishing wheel and polishing wax, and the conditional appearance is coated with anti-rust oil. Spray, paint the chassis, use a soft cloth to wipe off the dust, the appearance of scratches with the same color of paint to make up, do remember to put the spot on the radio painted, once the cover with a Gates and wing gates will be false alarms, causing unnecessary trouble.
two. Movement maintenance
Cut off the power, open the cover, clean the surface dust, spray the drive part with butter, the swing switch needs to remove the motor, apply butter to the gear and wheel slot, according to the original position of the motor is fixed, check the connection piece screw is loose , Tighten, limit switch and limit metal sheet do not easily adjust, the gap 1-2mm too far inductive, too close to easy to damage.
three. Power section maintenance
Cut off the power supply, remove the surface dust, check whether the plug-in is loose, plug in, tighten, do not arbitrarily replace the wiring position, whether the external power supply is exposed, timely dressing, whether there is leakage, timely processing, refer to the instructions, check each end of the interface The technical parameters are normal, and the aging electronic components are replaced in time.
Above swing gate and wing gate maintenance must have professional maintenance, especially the movement and the electronic control part, first cut off the power supply, safe operation, have to undergo professional training, fully understand the strong power and weaknesses in order to work posts.
For more information on the three roller gates, swing gates, wing gates, and translation gates, please pay attention to the Xingshunan website:
Thanks for the care and support of the new and old customers for Xingshun An's company over the years, to give everyone a New Year's greeting in advance, I wish you all a new year, Long Teng Huyue, all industries flourish, everything is in peace.
Stainless Steel Door
Armored Door,Steel Door,Security Door
Steel Door,Toilet doors,Wood Door Co., Ltd. , http://www.steeldoors-manufacuturer.com