FRP gas hood is suitable for use in burning method to control odor of sewage in refinery
FRP gas hood is suitable for use in burning method to control refinery wastewater odor gas glass reinforced gas hood is suitable for use in burning method to control odor of sewage in refinery plant. With the growth of many people's living standards and changes in survival concept, many people survive The requirements of the background are getting higher and higher, so the odor of the various kinds of odors is becoming more and more tolerant, and as the source of the stench, the sewage treatment plant bears the brunt. According to reports, many people complained that the number of complaints about stench was second only to noise, and the stench and governance of stench was forced to come to the forefront. The most effective way to solve the stench of odors until now is to install a FRP gas hood. The FRP gas collecting cover covers the hood on the pool body and seals tightly to prevent the exhaust gas from overflowing. The deodorizing device and the pipeline, the fan, the purification tower, etc. form a suitable set to achieve the improvement of air quality and try to take care of the background. And other goals.
Up to now, there have been many studies on deodorization technology, which can be divided into physical deodorization method, chemical method and living material deodorization method. Various disposal methods have their own advantages and disadvantages. Widely used is the deodorization method of living material, and the deodorization method of living material has obtained a large number of promotion and discussion applications because of better disposal effect and lower energy consumption. The burning method is better than the living material method. The deodorizing effect is better and the disposal is more thorough. However, in the burning method, there is a need to waste a large amount of burning materials, and there is a danger of fire and explosion in the burning process, and the burning method is not deepened. Research and promotion applications. Under the strong support of Sinopec Shijiazhuang refining and chemical sub-enterprise, the guts innovation and experiment were carried out on the burning method. It was proposed that the odor in the sewage disposal unit was put together and then entered into the sulfur recovery unit to be burned. The law governs the odor scheme, and this paper discusses a key issue in the process of burning the law. 1 odor component and provenance analysis From the final result of odor monitoring in a refinery wastewater treatment plant to the disposal unit, it is known that the sewage treatment plant distributes about 152 kinds of gases, and the main source of the odor is hydrogen sulfide and methyl sulfide. Alcohol, dimethyl sulfide, formaldehyde, trimethylamine, and the like.
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Composed of carbon fibers and glass fibers crossed at 90 ° impregnated with epoxy resin and molded under vacuum in an oven.
Perfect for making motor mounting plates, radio decks, horns, etc.This kind of sheet has similar surface with Full Carbon Fiber Sheet.But different strength ,wight and flexibility.Carbon glass sheets are more flexiable and less strength but cheaper,which are also popular in Carbon Fiber Sheet.Our standard size is 200x250mm,200x300mm,250x400mm,400x500mm and 500x600mm.But custom-made size and CNC service are also ok for us.
Carbon Glass Sheet,Carbon Glass Mid Sheets,Carbon Glass Laminated Sheet,Carbon Fiber Glass Sheet
Hobby Carbon CNC Technology(Shenzhen) Limited , https://www.hobbycarbon.com