Wear-resistant floor paint construction process wear-resistant floor paint performance characteristics

Decoration is a profound knowledge. The renovation includes many aspects, of which the floor decoration is also one of them. So the floor decoration is also very important, on the one hand to protect the ground, on the other hand is to give a comfortable feeling. In some workplaces, the use of the floor is a very extravagant thing. Therefore, there are some special floor processes, such as the terrazzo floor process, epoxy floor technology, etc. Larger open areas, some flooring technology has a wear-resistant, anti-static features. So how much do you know about wearable floor paint? What are the characteristics of this floor? What are the processes? Let's take a look with Xiao Bian below!

Let's first understand the characteristics of wear-resistant floor paint

(1) Dust-proof, wear-resisting, pressure-proof, water-proof

(2) Can do matte, light, semi-dull and non-slip effects

(3) Low cost, easy to clean and easy to maintain

(4) Rich colors and extremely beautiful surface effects

Second, wear-resistant floor paint construction process

(A) wear-resistant floor paint base treatment

(1) Consolidation of prime soil, using layered back-up soil, the thickness of each layer should be controlled within the range of 30-1250px, and mechanical compaction or manual tamping should be used to ensure that the compactness of the earth does not ensure that the compactness of the earth is consistent with the wear-resistant floor paint design. Claim.

(2) At the end of a 100-thick gravel bed, coarse aggregates of 2-100 px particle size gravel are evenly laid, and mechanically compacted or artificially compacted.

(3) 150-thick C20 concrete with 6.5 two-way reinforcement inside, and the spacing between bars is set at 120mm in order to prevent large cracks and settlements on the ground. The concrete continues to polish.

(4) After the concrete base layer has a certain strength, a 0.6-thick layer of SY-PET waterproofing membrane can be constructed. Wet the base layer first, dispose the cement adhesive, stir it evenly, apply it directly on the base layer, and then paste it according to the established sequence. For complicated parts and corners, strengthen the treatment.

(B) Wear-resistant floor paint construction process

When the grassroots initial setting, spread the aggregate, and strive to spread evenly, sprinkle the material twice, and ensure the amount;

(1) 2/3 of the total amount of the first spread, compacting the bristles with a polished disc;

(2) Spread 1/3 of the total amount for the second time and compact the bristles with a trowel;

(3) After initial setting, wipe it with a calender;

(4) Check the smoothness of the material after spreading, timely adjust the material at the low defect, and then compact the armpit hair and wipe the light;

(5) Prior to completion, polishing with a trowel finishes the process;

(6) Apply evenly ground conditioners.

Third, wear-resistant floor paint different types of construction attention

1. Non-metallic type

The non-metallic wear-resistant floor is composed of selected aggregates with certain particle size grading, high-strength cement, special admixtures, pigments and polymers, and can form a layer of dense colored wear-resistant surface layer on the foundation concrete. Good impact resistance. Can be widely used in shopping centers, large supermarkets, sidewalks, parking lots, production workshops, machine maintenance workshops, warehouses and other places that need to enhance the surface wear resistance, can be used both indoors and outdoors, even if it is in a long-term wet state will not affect it Performance. According to the requirements of the ground wear layer (1.5-3.5mm), the recommended dosage is 5-7kg. The main technical indicators of the quartz sand type wear-resisting floor system: 28 days flexural strength 12MPa 28 days compressive strength 85MPa surface hardness, mm (indentation diameter) 2.8 wear resistance ratio.

2. Metal type

The metal wear-resisting floor is composed of selected aggregates with certain particle size grading, high-strength cement, special admixtures, pigments and polymers, and is distributed in the concrete surface of the initial setting stage evenly by dry-type spraying method. With the construction of professional construction tools, a layer of extremely dense, high-strength colored wear-resistant surface layer can be formed on the foundation concrete. Hardwearing agents are available in 4 colors (cement color, gray, red, green), which have the advantages of good bonding with the foundation concrete, compact surface, high abrasion resistance and strong impact resistance. Can be widely used in concrete surfaces that require special enhancement of surface abrasion resistance and impact resistance, such as production and processing workshops, machine repair workshops, warehouses and other places. The disadvantages are that they are not suitable for the ground in long-term humid environments, and are often exposed to acids and crystals. Salt and other chemical solvents on the ground. According to the requirements of the ground wear layer (1.5-3.5mm).

3. Alloy aggregate

Alloy aggregates wear-resistant floor materials Mineral alloy aggregates (tin-titanium alloy) Wear-resistant materials consist of a certain amount of mineral aggregate aggregate, special cement, miscellaneous miscellaneous materials and admixtures, and can be used after opening the bag. It is evenly spread on the surface of the concrete, which is about the initial setting stage, and is processed by special means so as to form a whole with the concrete floor, and the high surname with high density and color can wear the ground. Features: Strengthen the wear resistance of concrete floors, impact resistance character strength. The density of the concrete is greatly increased, so that it does not cause dusting, increases the oil repellency of the ground, and forms a high-density, easy-to-clean, anti-permeability floor together with the concrete floor. Resistance to heavy pressure, strong abrasion resistance, no dust, enhanced oil resistance on the ground, resistance to infiltration, and cleanliness.

Xiao Bian concludes: The wear-resistant floor paint performance characteristics, wear-resistant floor paint construction technology introduced here, and hope to be helpful to everyone. If you want to know more related information, you can pay attention to this website information.

What tiles wear-resistant porch floor balcony wooden floor tile price table wear-resistant mats

Electric Industry Roll Forming Line

Roll Forming Machine,Electric Industry Roll Forming Line,Electric Industry Roll Forming Machine,Electric Industry Roll Making Line

Xinxiang Tianfeng Machinery Manufacture Co., Ltd. , https://www.frollforming.de