Skillful CAD Tutorial: Parting Surface of Zhongwang 3D Mould

Zhongwang 3D is another masterpiece of Guangzhou Zhongwang Longteng Software Co., Ltd. Continued Zhongwang CAD platform software. Zhongwang 3D is a very powerful CAD/CAM software. It is able to master Zhongwang 3D skillfully and greatly improve the efficiency of CAD design work. Today, I will introduce you to several ways to create a fractal surface in Zhongwang 3D:

The parting surface refers to the separable contact surface separating the mold from the product and the gluing system. A pair of molds may have one or more parting surfaces as needed, and the parting surface may be perpendicular to the mold clamping direction or may be parallel or inclined to the mold clamping direction.

The form of the parting surface is from the number of parting planes, and there are single-parting surface, double-parting surface, and multi-parting surface. From the shape of the parting surface, the plane, the bevel, the step surface, and the surface.

In Zhongwang 3D software, there are seven methods to create the parting surface, which are: parting surface, parting surface which is at an angle to the surface, parting surface of vertical plane, parting surface of sweeping curve, Partition surface transitions, parting surface fillets, and transformation loops create faces.

1. Parting surface, which is to use the previously created parting line and a mold envelope to divide the surface. The figure below shows the data options required to create a parting surface.

The way to create the parting surface is: Before this step, you must have a sketch of the mold envelope and create the parting line for the mold. Among the three mandatory options, the envelope refers to the mold envelope of the created sketch; the outer is the outer boundary of the parting surface; the inner is the inner boundary of the parting surface, both of which can be used in the mouse. The key is ignored.

2. A parting surface that is at an angle to the surface. It uses the previously created parting line to create a parting surface that is at an angle to the surface. The figure below shows the data options required to create a parting surface.

The way to create this parting surface is to select the previously set mold parting line and use the following distance and angle settings to create a new parting surface.

3. The vertical plane parting surface, using this created parting line to create a vertical plane parting surface The following figure is the data selection required to create the parting surface.

The way to create this parting surface is to select the previously set mold parting line and select a plane to create the desired parting surface.

Silicone Products

Silicone Protective Cover,Computer Keyboard Cover,Anti Slip Pad

Silicone Phone Accessories Co., Ltd. , http://www.cn-kitchenwares.com