PP Fiber Reinforced Wrapping Tape
Model NO.: T500
Trademark: SHIJIE
Transport Package: Carton
Origin: Daqing
HS Code: 39191099
Model NO.: T500
Trademark: SHIJIE
Transport Package: Carton
Origin: Daqing
HS Code: 39191099
PP Fiber Reinforced Wrapping Tape SHIJIE-T-500Â Â Product Description
PP Fiber Reinforced Wrapping Tape / PP wrap tape / PP proven tapeÂ
PP Fiber Reinforced Wrapping Tape, cold applied reinforced tape to protect metallic and concrete surfaces against corrosive forces.
PP Fiber Reinforced Wrapping Tape is constituted by an adhesive (modified bitumen with synthetic rubber) of increased thickness, laminated onto a film of woven polypropylene fabric and disposable release sheet, which creates a strong bond with a pipe surface, protecting against moisture penetration and metal structures. This tape is the best solution for coating of pipes and repair.
Structure
Backing:Â Polypropylene woven fabric cloth,
Adhesive layer: Butyl rubber with modified bitumen adhesive
Release paper: Grey silicon release paper
Uses
| Waterproofing- | Pipelines anti-corrosion protection |
| -Waterproofing membrane for basements, |
_Â Weld joints _ Bends _ Fittings _ Bare pipe lengths _ Pipe rehab and repair -Bare pipe length |
Features
| Waterproofing- | Pipes protection |
|
-Cold applied. -High resistance  to bad weather environment -Good performance itself to keep dry -Easily application &installation. -Suitable for a wide range of temperatures - Compatible primers |
_ Cold applied _ Excellent self adhesion to pipe _ Flexibility provides extra protection at vulnerable areas _ _ Easily applied with no special equipment _ Compatible with common pipe coatings -Tenacious adhesion, |
| PROPERTIES | UNIT |
TYPICAL VALUES Â |
TEST METHOD |
| Base  film | -- | PP woven fabric | -- |
| Thickness for base film Thickness for Adhesive thickness for total |
mm mm mm |
0.3 1.9 2.0 |
EN1849 |
| Tensile strength | N/10mm | 200 | ASTMD1000 |
| Elongation at break | % | 80 | ASTMD1000 |
| Peel strength to mineral wool | N/cm | 5 |
EN 12068 Â |
| Peel strength tape to tape at  | N/cm | 25 |
EN 12068 Annex B |
| Impact resistance at 23° | mm | 20 | EN 12691 |
| Application temperature | °C | -5+50 | -- |
| Operation temperature | °C | -5+80 | -- |
| Shelf life | Months | 12 | Â |
Product Description
PP Fiber Reinforced Wrapping Tape / PP wrap tape / PP proven tapeÂ
PP Fiber Reinforced Wrapping Tape, cold applied reinforced tape to protect metallic and concrete surfaces against corrosive forces.
PP Fiber Reinforced Wrapping Tape is constituted by an adhesive (modified bitumen with synthetic rubber) of increased thickness, laminated onto a film of woven polypropylene fabric and disposable release sheet, which creates a strong bond with a pipe surface, protecting against moisture penetration and metal structures. This tape is the best solution for coating of pipes and repair.
Structure
Backing:Â Polypropylene woven fabric cloth,
Adhesive layer: Butyl rubber with modified bitumen adhesive
Release paper: Grey silicon release paper
Uses
| Waterproofing- | Pipelines anti-corrosion protection |
| -Waterproofing membrane for basements, |
_Â Weld joints _ Bends _ Fittings _ Bare pipe lengths _ Pipe rehab and repair -Bare pipe length |
Features
| Waterproofing- | Pipes protection |
|
-Cold applied. -High resistance  to bad weather environment -Good performance itself to keep dry -Easily application &installation. -Suitable for a wide range of temperatures - Compatible primers |
_ Cold applied _ Excellent self adhesion to pipe _ Flexibility provides extra protection at vulnerable areas _ _ Easily applied with no special equipment _ Compatible with common pipe coatings -Tenacious adhesion, |
| PROPERTIES | UNIT |
TYPICAL VALUES Â |
TEST METHOD |
| Base  film | -- | PP woven fabric | -- |
| Thickness for base film Thickness for Adhesive thickness for total |
mm mm mm |
0.3 1.9 2.0 |
EN1849 |
| Tensile strength | N/10mm | 200 | ASTMD1000 |
| Elongation at break | % | 80 | ASTMD1000 |
| Peel strength to mineral wool | N/cm | 5 |
EN 12068 Â |
| Peel strength tape to tape at  | N/cm | 25 |
EN 12068 Annex B |
| Impact resistance at 23° | mm | 20 | EN 12691 |
| Application temperature | °C | -5+50 | -- |
| Operation temperature | °C | -5+80 | -- |
| Shelf life | Months | 12 | Â |
Expanded Metal Mesh, also called expanded metal, metal expanded mesh, diamond metal mesh. It is an expanded diamond mesh formed by processing a metal plate through a steel mesh punching machine.
Materials: carbon steel, stainless steel, aluminium plate, brass plate, titanium plate, nickel plate, al-mg alloy plate.
Hole Shape: diamond, square hole, scale hole
Surface Treatment: PVC coated, hot galvanized, lacquered
Application: it is widely used in filters baskets, air filtration units, medicine, machine guards, animal ages, the protecting of electrical equipment window, safety door, room dividers, decorative celling, highway fence, civil building. Concreter in for cement, walkway, anti-dazzle panels, plaster trims, fan covers.
Expanded Metal Mesh
Expanded Metal Mesh,Expanded Steel Mesh,Stainless Steel Expanded Metal Mesh,Expanded Aluminum Mesh
Hebei Zhenxing Jinyuan Wiremesh Group Co.,Ltd , http://www.zxsteelgrating.com