How to lay a floor tile
When the new house is renovated, the laying of the floor is an indispensable process. Floor tiles are often laid on the concrete floor to make the room more beautiful and comfortable. But how to choose the floor tile? How to lay the floor tile ? The following will follow Xiaobian to understand it.
1, how to lay floor tiles
a. Primary treatment
Before laying the floor tiles, the ground must be cleaned to ensure that the floor is flat and clean. The floor tiles that are laid on this floor will also be flat and will not be uneven, which will not affect the beauty.
b.
Immediately afterwards, it is necessary to play a line when paving the floor. Its main function is to plan ahead for the area where the floor tile is laid, and to pop up the control line for the elevation around the wall so as to ensure the height of the floor tile. It will be consistent; pop-up crosshairs on the floor control the size of the floor tiles.
d, soaking treatment
Of course, the floor tiles should be treated with water soaking when laying, and it is also a necessary step for how to lay the floor tiles so as to ensure the wetness of the floor tiles on the back; then, according to the proportions, the cement should be reconciled, and when laying the floor tiles, remember to use a rubber hammer to strike. Floor tiles have reached the level of requirements.
e, clean up
As long as the orderly, serious and careful floor tiles are laid out, the ground can be cleaned as a whole. However, when paving, it is advisable to clean it up while paving. This will reduce the burden on the maintenance of the floor tile after it is completely finished and it will save a lot of work.
2, how to choose the floor tile
First, look at the appearance of the floor tiles. Just observe whether the color on the back is pure, and the color of the floor tile is uniform and uniform.
Second, observe the cross-section of the floor tile particles. Because the fine grains represent the waterproof ability of the brick; otherwise the large particles are undesirable.
Again, look at the thickness of the glaze layer. The thicker the glaze is, the more glaze is, and the better the quality is.
Then, you can also distinguish the sound of the floor tiles. Tap the floor tile, if the sound is crisp, the quality is better; otherwise, boring is not recommended to buy.
Finally, observe the waterproofness. Pour some water on the back of the floor tiles. If the water is spread out and the infiltration is slower, the density of the floor tiles is larger and the quality is better. On the contrary, if the quality is poor, it is not desirable. 
Xiao Bian concludes: The above is an introduction to how to lay out floor tiles and how to choose floor tiles. I hope to help everyone. As owners, we are all non-professionals. Although they are all handed over by the master of decoration, only the correct paving of floor tiles can bring convenience to your life and add beauty to your home.
Guangdong Jia Mei Biological Technology Co.Ltd , https://www.jaymeimask.com