Brush yourself with latex paint so that you brush your own world
The current decoration market, labor costs soared. So now, many people choose to brush their own latex paint . Because its process is not complicated, it can save money and can also experience the joy of labor. How do you brush latex paint yourself? What are the precautions for using your own latex paint ? Following Xiaobian look at it.
How to brush your own latex paint
1. First buy a suitable paint tool and brush.
The good quality tool can brush out thicker coating, so that you can cover the color of the bottom of the original, while also ensuring the durability of the paint film, withstand repeated scrubbing.
2. Before sewing the latex paint, make joints and level the joints.
The dust, dirt, etc. on the wall should be removed with a clean wall or glass-dedicated cleaner or water and dried. If the wall has nail holes and other pits can be filled with putty.
3. Brushing method
First use a tool to brush out a "frame" around the wall, and then use a roller to roll over the "frame". Roll up and down on the wall with a roll of paint ("W" or "M" shape) and fill in the missing area. Roll back and forth to the left and right. Cross back and forth. Way to brush.
Brushing sequence: Generally starting from the ceiling, then the walls, doors and windows, and finally brushing the skirting board, windowsill and so on.
General renovation construction using brush and roller coating, brush painting brush labor intensity, the general decoration is most of the roller coating, brushing corner difficult to handle part. Spraying generally requires a professional construction team, and the cost is relatively high. It is not suitable for individuals to operate. Xiaobian will no longer explain it.
Roller coating and brushing method: The brush must be removed before use. First brush your brush with your own fingers and clean it up. Wet the paint brush with water. When using paint, dip the brush in half of the paint. After digging, it is best to let the brush brush back and forth a few times in the bucket, so you can avoid too much dipping, but do not force the scraping.
When you need to brush a large area, you can first apply a brush-like wide stripe vertically, then evenly apply it horizontally until it covers, and then wipe it again in the vertical direction (cross method).
What are the precautions when brushing your own latex paint?
If you paint by yourself, especially if you are painting at home, it is advisable to buy an odorless latex paint. Although it is more expensive, you can stay in the paint afterwards.
A set of colors
1. On a swatch, or even a paint bucket, the colors seen may not be the same as those applied to the entire wall. To avoid undesirability, take the following steps: Do not make a final decision on which color to use in the paint shop; instead, take a swatch or actual paint sample home, on the wall to be painted Observe the color of the paint;
2. Observe the color of the paint under natural light and night light respectively, because even if the same paint is of the same color, the colors appearing under different lighting conditions will be different.
3. At the same time, keep in mind that when you paint a large area with a color paint, the color tends to increase. To make up for this, it is best to use a lighter coating than the desired color.
4, the paint has a variety of gloss, both "highlight" and "flat light." Higher gloss paints are more reflective, so this paint will make the room look brighter. On the other hand, high-gloss paints tend to protrude from the wall, so if the wall is not very flat, plain paint should be used.
Second, choose the right brushing tools and brushes
A good quality tool can brush out a thicker coating, better cover the original color of the underlying layer, make the paint film more durable, and withstand repeated scrubbing.
Three. Before brushing the wall
The dust, dirt, etc. on the wall should be removed with ordinary detergent or water and dried. If there are nails on the wall, fill it with a filler. Fine cracks can be filled with high quality 100% acrylic sealant.
Fourth, brushing the interior wall
A brush is used to brush the outer edge of the wall out of a "frame" and roll it over the "frame". An effective roller coating method is to roll a large "W" or "M" shape on a wall with a roller paint, and then fill it and roll it in different directions.
Editor's summary: The relevant information about own brush latex paint is introduced here for everyone, I hope this article helps everyone. If you still have something you don't understand, you can leave a message to Xiaobian at the bottom. We will answer your questions as soon as possible.
Latex paint engineering paint construction acceptance paint coating
Kitchen Shower,Kitchen Faucet,Brass Kitchen Faucet,Pull Down Kitchen Faucet
Yuyao Zelin Sanitary Ware Co., Ltd , https://www.zelinsinkfaucet.com