| Home>Bearing knowledge>Seven major treatment methods for replacing metal damage machine bearings |
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";
Seven major treatment methods for replacing metal damage machine bearings
Source: China Bearing Network Time: 2013-12-28
| /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
Metal destroyer is one of the commonly used destruction equipment in mining operations. Metal crusher is in the process of production; bearings and blades are the most wear and tear; therefore; we must inspect the bearings and blades of metal crushers in time. And replacement; as long as this; to ensure the normal production of metal crushers. The following are the seven major methods of replacing metal damage machine bearings.
(1) The hammer device in the maintenance device is faulty. When the hammer is changed, the rotor component is used in the U-turn; in order to avoid the balance of the rotor component; all the hammers in the metal destruction machine need to be turned around in the same direction; otherwise, there will be intense oscillation during operation.
(2) The difference between the two groups of hammer components exceeds 5 grams. The method of sweeping is to adjust the hammer component; the difference between the two components is less than 5 grams.
(3) The single hammer is stuck too tightly; there is no opening during operation. After the stop, the investigation can be changed by hand; the method is to make the hammer change sensitive.
(4) The components of the rotor are unbalanced; at this time, the demand should be carefully checked to adjust the balance.
(5) The spindle is bent and deformed. The method of processing is straightening or replacing.
(6) Bearing clearance exceeds the limit or damage. It is usually used to replace the new bearing to deal with the problem.
(7) The bottom corner fixing nut is not fixed tight or loose during operation. The method of handling is fastening.
Xindi metal destruction machine is reasonable; carefully carved, equipped with high-precision low-noise gear motor drive; Intermeshing blade; so-called meshing is the tooth of a pair of gears; touching in sequence; then completing the process and shape of the relative movement of certain rules; better and more complete destruction of the can. For better damage to the cans; It is a special blade; the hardness of the blade is not lower than HRC55. The appearance is on the premise of beautiful; more emphasis on quality; strong structure; full-strength ribs; ensure the strength of the cabinet. More safety signs and safety labels; It is more and more safe; think for the broad customers; specially equipped with automatic buttons; make the operation more secure; convenient; simple and easy to understand. To save some human resources; able to distribute conveyor belts.
Recommend to friends comments close window
| Bearing related knowledge |
The production process of the ferrule of the imported bearing The handling method of the bearing temperature rise during the operation of the turbine The common method of the bearing is combined with the layout of the needle bearing and the data of the ball bearing steel
|
This article links to http://
Please indicate the bearing network http://
Previous:High quality tapered roller bearing 32010X
Next: Simple and convenient diagnosis of SKF bearings
Washer
Washer
Hebei Qianmu Fastener Manufacturing Co., Ltd , https://www.qmjgjfasteners.com