Double effect one wood grain brick construction step and method
Like the texture of the wooden floor, but also like the strong and easy to take care of the floor tiles, it is really difficult to choose between the two. Today we are talking about a "magic" thing called woodgrain brick, which refers to a ceramic tile with a decorative effect on the surface of natural wood texture patterns. Just put what you want together into one. Next, talk about the construction methods and steps of wood grain bricks.
1, determine the program
The commonly used wood grain brick paving methods, in addition to the traditional well-shaped ceramic wall tiles like a law-abiding, horizontal and vertical paving methods, there are wood grain brick-shaped, I-shaped, oblique-shaped thread and other paving methods. Paving can be described as varied. Each has its merits. So be sure to work with the designer to determine the plan first.
2, leveling
The so-called leveling, immediately before the paving of the brick, should deal with the surface of the building or the surface of the wall. Such as the ground, interior walls, exterior walls and so on. Eliminate surface attachments and mix them with semi-moistened cement sand.
3, line
Stretching means using a long thin line, applying white ash cargo, determining the central axis of the brick, and then sticking it along the line.
4, choose brick
It depends on the type of bricks laid out in the plan, and it is selected and put into categories. For example, floor tiles, bricks on the wall, and woodgrain tiles on the skirtings should be separated to avoid confusion.
5, dipping brick
The wood grain bricks must be soaked with the same water as the polished bricks and antique bricks. They must use tap water or clean water, they must not use swill or dirty water, and they must not use oily sewage. The soaking time does not take too long, that is, it can be soaked. (The tiles must be soaked in order to be laid).
6, mixed pulp
The cement sand should be mixed in a ratio of 1:2. The cement with the reference number 325 should be used. If the cement with a too high label, the internal grain tension of the wood grain bricks will be formed, and the wood grain bricks will be severely cracked.
7, paste
Remove the soaked wood grain bricks, wipe the water stains on the wood grain bricks, and spread the grout evenly on the back of the wood grain bricks. The thickness of the mortar is 2-3 cm, and then the wood grain bricks will be spread on the surface of the cement sand. Use a wooden hammer to gently knock the brick surface of the wood grain until it is even and flat.
8, paving
Paving should pay attention to the order of the grainy brick textures, pay attention to the bricks at the end of the bricks, etc., tap the wooden hammer to avoid air knocking, and balance the force, avoiding too much or too little strength. It is best to use plastic crosses for paving tiles so that they can better position wood grain tiles. Wooden hammer Beat the grout against the overflowing grout with a sponge or a rag. High-grade wood grain bricks generally have a gap of less than 1 mm and require no special caulking.
9, trimming
The wood grain bricks are laid well, and the cement is not yet completely dry. The cement can be observed with the naked eye or measured with a horizontal ruler, and the wood grain bricks can be trimmed according to the standards. Check the flatness of the brick shop, the straightness of brick seams, etc. Find the problem and fix it immediately, severely reopening the wood grain bricks.
10, caulking
If you want to fill the joints, then dry the joints with a hook after the cement has dried, and then fill it with a matching colorant.
Tile shop decoration construction knowledge
Door Hinge,Freezer Door Hinge,Cooler Door Hinges,Flush Door Hinge
LONG TERM ELEC. CO., LTD , https://www.longtermhvac.com