1. Construction procedures for the wooden keel partition wall Clean up the ground floor → line, find the rules → In the ground with bricks, cement mortar to make the pillow belt (also known as the kick base) → elastic line, back to the ceiling and the main structure wall → The vertical border of the wall bars → installation along the edge, along the edge of the surgery → vertical partition keel → nail horizontal keel → cover panel, set aside the socket location and set up reinforced wood → cover panel processing.
2. Construction Points for Wooden Keel Partition Walls The wood dragon skeleton should use red and white pines with a size of 40 mm × 70 mm. The spacing of the vertical keel is generally between 450 and 600 millimeters.
When installing along the ground and along the top, the two ends of the cylinder should be inserted into the brick wall at least l20mm to ensure that the partition wall is firmly connected with the original structural wall.
Construction process of glass brick dividing wall Construction points of glass brick dividing wall:
Glass bricks should be built on the basis of two reinforced f6-f8 reinforcements. The base height should not exceed 150mm and the width should be more than 20mm above the glass brick thickness.
For the application of metal profiles at the top and the ends of the glass brick dividing wall, the width of the bad mouth should be greater than the thickness of the brick 10~18mm.
When the partition length or height is greater than 1500mm, one reinforcing bar is set in every two layers in the vertical direction (two steel bars are provided when the length and height are more than 1500mm), and one reinforcing bar is arranged every three vertical slots in the horizontal direction. Rebar extends not less than 35mm into the slot. The height of glass blocks reinforced with reinforced steel shall not exceed 4m.
The ends of the glass partition wall and the two sides of the metal profile shall have a slide joint with a width of no less than 4mm, and the joint shall be filled with linoleum. The glass partition board and the profile shall be left with expansion joints with a width of not less than 10mm to avoid damage to the glass brick partition wall.
The top layer of the glass brick should extend into the top metal profile notch 10 ~ 25mm, so as to avoid breaking the glass block due to rigid extrusion.
The joint between glass tiles shall not be less than 10mm and not more than 30mm.
The joints between glass bricks and profiles, profiles and buildings shall be sealed with elastic sealant.
Glass Socket Cement Glass Brick Craft Glass
Pond Animal Lights
LED Mandarin Duck Lights,LED Mandarin Duck Lamp,LED Outdoor Mandarin Duck Lights,LED Garden Mandarin Duck Lights
Sichuan Kangruntengpu Photoelectric Technology Co., Ltd. , https://www.tengpulighting.com