Cabinet Door Material Type Cabinet Door Price Comparison

For consumers who choose cabinets, the cabinet door material and the cabinet door price are very distressing problems because the cabinet door has a good variety of materials, so the corresponding price is not the same. Let's take a look at the cabinet door material And relative to the cabinet door price, let everyone have a reference.

Cabinet door material type and cabinet door price

Spray paint door

What is "baking"? At present, the so-called "baking" used for cabinet door panels only illustrates a process, that is, the paint is heated and dried after entering the drying room. The advantage of spray paint door panel is its bright color and strong visual impact. Disadvantages are high technical requirements and high scrap rate, so the price remains high.

Reference price: Ordinary 18mm melamine plate material cabinet door, the lowest price of about 85 yuan / square meter, uv paint the lowest offer about 180 yuan / square meter. The price of aluminum edge banding is about 10 yuan per meter.

PVC molded plastic door

The medium-density board is used as a boring and milling pattern for the substrate, and the imported PVC veneer is formed by hot pressing and blister forming. PVC molded board has the advantages of rich color and unique shape. Since the four sides of the door plate can be sealed and integrated after the blister, there is no need for edge banding, which solves the problem that the edge banding may be opened after a long time. Foreign countries call it “there is no defect plate”. General PVC film is 0.6mm thick, there are also used 1.0mm thick high-brightness PVC film, the color is like high-grade mirror paint, high grade.

Reference price: The current market is about 110/square meters.

Solid wood door panel

The cabinet doors made of solid wood have the effect of returning to nature and returning to nature. Especially some high-grade solid wood doors imported from Germany and Italy, the superb technology has reached the world's highest craftsmanship in the processing of some lace corners and the color of the paint, but its price is expensive, and it is more popular among those who are well-funded. The wooden festival, the living quarters belong to the normal structure, and the dead and decadent festivals should be avoided.

Reference price: Solid wood door panels vary according to the raw materials of the wood, resulting in a large difference in the price of solid wood door panels, ranging from a few hundred to a few thousand per square meter.

Fireproof door panel

Although the refractory board is used for the kitchen countertop surface, there are defects such as poor moisture resistance, but there is an advantage that can not be replaced for the cabinet door panel. The reason why refractory door panels are prosperous and long-term occupies a dominant position in market share is determined by their comprehensive performance. The characteristics of wear-resistant, high-temperature resistant, scratch-resistant, anti-penetration, easy-to-clean and bright color of the refractory board meet the requirements of the cabinet, adapt to the special environment in the kitchen, and cater to the development trend of combining “beautiful and practical” cabinets.

Reference price: about 169/square meters.

The relevant information about the cabinet door price was introduced here for everyone. I hope this article will be helpful to everyone. If you still have something you don't understand, you can leave a message to Xiaobian at the bottom. We will answer your questions as soon as possible.

Cabinets Cabinets Cabinets Brands Counters Cabinets Doors Doors Doors Doors Kitchen Doors

Drill and tap set

Taps and dies are tools used to create purpose screw threads, which is called threading. Many are cutting tools; others are forming tools. A tap is used to cut or form the female portion of the mating pair (e.g. a nut). A die is used to cut or form the male portion of the mating pair (e.g. a bolt). The process of cutting or forming threads using a tap is called tapping, whereas the process using a die is called threading.
Using an ordinary tap or die to clean threads generally removes some material, which results in looser, weaker threads. Because of this, machinists generally clean threads with special taps and dies-called chasers-made for that purpose.

Drill And Tap Set,Hand Tap And Die,Cutting Tool Sets,Hand Tap Wrench

Behappy Crafts (suzhou)Co.,Ltd , https://www.craftsbehappy.com