Zhongwang software application skills: set shortcut keys to improve CAD drawing speed
I don't know if you are still used to drawing and drawing a pair of drawings when you are using CAD drawing. Now I'm going to introduce you to a faster way to draw and apply your left hand to the drawing.
Open the menu - Tools - Custom - Keyboard, in the pop-up form, we can set some of the most commonly used shortcut commands. The specific operations are as follows:
1. As shown below, click New, then press the shortcut you want to set. For example: press ALT+Q.
2. After setting the shortcut key, click the “optional command†on the right side to select a common command you need, such as: circle; then click the “Add Command†button. Such a simple shortcut to draw a circle is set.
3. Set up the various shortcuts you need, then close the form back to the drawing. We now press and hold the "ALT" button, press the "Q" button, you will find that the command to draw the circle is called directly. how about it? Is it very convenient?
You can try to edit the common commands such as delete, extend, and pop-up into shortcut keys. Then when you press the desired command from the left hand, the right hand can directly perform the corresponding operation on the graphic, so that you don't have to use the menu. Go up and go. The speed of drawing will also be greatly improved.
Finally share a little trick of CAD trimming:
When using the trim command, we usually select the object to be trimmed one by one, sometimes it is not efficient. To implement the trimming process faster, you can use this trick to input the trim command first: "TR", then click the space or enter, the command line selects the word to trim the object, then do not select the object, continue to enter or space, the system default is to select all! This can quickly complete the process of pruning, and you can try it without any use!
For more information about Zhongwang CAD2009, please visit:
Http://
Not only does MUYUAN offer the complete pumps, we also offer the rubber pump spares parts for a series of pumps, they include the
- Impeller
-Cover plate liner
-Frame plate liner
-Throatubsh
-Back liner
-Others
The properties of the rubber material:
We have variety of natural rubber and elastomers, which can be used for pumping corrosive or acid slurries. But the rubber material is not suitable for slurries which contain sharp solids.
When the slurries contain fine particles, the rubber material features good performance of wear resistant.
Except the Rubber Pump Parts, we can also offer the high chrome pump parts,polyurethane pump parts,Stainless Steel Pump Parts, Ceramic Pump Parts.
Polyurethane Pump Parts,Polyurethane Pump Impeller,Slurry Pump Spare Parts,Polyurethane Slurry Pump Impeller
SHIJIAZHUANG MUYUAN INDUSTRY & TRADE CO., LTD. , https://www.cnmuyuan.com