Introduction to wall decoration process, introduction to wall decoration
When I used my savings to buy a house and got the keys, the most important thing left was the decoration. Xiaobian thought that before we renovated the house, let’s first understand that the decoration process is very necessary. Down, the decoration home Xiaobian, let us introduce for you first, the wall decoration process and the wall decoration precautions, respectively, I hope that the introduction of Xiaobian will be helpful to friends.
First, the wall decoration process introduction
1. Check the wall surface. The wall surface in the rough room is generally a cement wall. Therefore, before the wall surface is decorated, it is necessary to carry out detailed inspection on the wall surface. Thoroughly check whether the front of the cement that needs to be painted in the rough room is firm and flat.
2, finished product protection, before the renovation of the wall, there should be other projects done, in the wall surface treatment will inevitably have dust, but also putty, paint or other glue drops when brushing putty Fall, so before you decorate the wall, be sure to protect other finished products in the room. Generally, plastic paper of suitable size can be purchased in a convenience store, and the finished product to be protected is wrapped on the construction site, but the shielding strength of the finished product should be carefully guarded to avoid the possibility of damage to the finished product.
3, sealing layer treatment, sealing is mainly divided into two aspects: one is the crack, slotting, hole filling, this can be repaired with gypsum products; there is also a wall base layer curing, this is generally There are also cases where a curing agent is used, and some cases require a more curing patch (kraft paper).
4, putty putty, before the putty on the wall in the rough room, you should first measure the flatness of the wall surface, you can use more than two meters of the measuring rule to measure, this way can determine the method of scraping putty. Generally, the putty on the wall needs to be scraped twice by putty, which can make the wall level and even the bottom color of the wall.
5, brush the primer, first brush the primer, clean up the polished wall surface dust, you can paint the primer. The primer can be applied once and it must be uniform. After it has dried out, the next step can be carried out.
6, brush topcoat, the topcoat is generally brushed twice, each time interval is 2-4 hours or more (to the dry finish of the topcoat) basically can be. After brushing the topcoat for the second time, it takes 1-2 days to completely dry out. Before the coating is completely dry, it must be waterproof, drought-proof, and sun-proof to prevent problems with the paint film.
Second, the wall decoration notes
1, the simplest and most common way to brush latex paint, it must be reminded that many industrial coatings have more or less toxicity, should pay attention to ventilation during construction, after construction, at least a week or more after evaporation, can stay, So as not to cause harm to the health of the family.
2, tiling tiles is a major project in the current renovation. Most of the tiles are applied to walls in kitchens, toilets, balconies, etc. The main problem is the handling of the waterproof layer.
3, there are many kinds of wallpapers, and the colors and patterns are very rich. The main key technology for the construction of wallpaper is the problem of mildew and handling of stretchability.
After reading the article above the small series, the parents have no right, the wall decoration process, the wall decoration precautions, have a certain understanding of it, Xiaobian hopes to introduce the wall decoration process through the above small series, You can decorate the house that you are satisfied with. If you want to know more home decoration information, please continue to pay attention to it.
More related wonderful reading:
Environmentally-friendly integrated wall surface introduction environmentally friendly integrated wall decoration process
Ningbo GDoor hermetic doors adopt unique engineered rail track with special rubber which is attached with the downside of the door leaf. During the opening process, the door will slightly run upwards, then return to the normal track. And in the same way, when the door is closing, the door leaf will move along the normal track, then slightly run downwards to implement the hermetic effect. Compared with other Ningbo GDoor Automatic Sliding Doors, carriage sets of Ningbo GDoor medical hermetic doors are a little different from their running carriage sets.
Hermetic Door Parts,Sealing Front Door Parts,Automatic Door Parts,Sliding Partition Doors Parts
Ningbo Gdoor System Control Technology Co., Ltd. , http://www.gdoor-cn.com