How does a wall switch disassemble a wall switch How to safely pack
Although the switch on the wall is only a small item, the deployment of these items is a step that can't be overlooked in the process of house decoration, and its installation has a lot of scientific nature. Necessary trouble, then how to replace the switch burned? The following Xiao Bian will tell you how to disassemble the wall switch and hope to help your operation.
How to disassemble the wall switch
1. First, open the switches and related equipment that need to be dismantled. Generally speaking, the circuit breaker can master the entire room. Of course, some residents also use it to control a specific wall.
2, although this step is relatively simple, but if it is not done, there may be some unnecessary trouble later, after the switch is opened, use a screwdriver to remove the screw fixed on the cover, remove the cover and probe, will They are placed on screw terminals on each switch to ensure that there is no power to switch.
3, although the screw is just a simple operation, but if there is no skill, it is very easy to break the screw, do the second step and, then prepare a Phillips screwdriver, unscrew the switch and the junction box, so that the demolition It is more convenient to access the switch on the side of the wire end.
4. Loosen the fastening screw with a screwdriver, pull the wire so that it is separated from the switch, and then pull it away from the wall so that the switch is removed.
How to disassemble the wall switch: how safe the wall switch is assembled
1. Internal cleaning of the bottom box after the bottom box is completely removed
First of all, to clean the area where the switch is located, remove as much dust and debris as possible. Usually, the installation of the product is carried out after the carpentry paint has been applied. Therefore, the bottom case that is stored for a long time will inevitably contain some dust. Therefore, Clean up these impurities before installation.
2, power line processing
Leave the wire in the box for a certain length so that it can be repaired later. Cut the wire out of the wire core, but do not touch the wire core. Then, wind the wire clockwise on the terminal of the switch socket, and then rotate the wire. Press the head.
3, socket three wire connection method
Each line should be connected to the corresponding outlet port. Otherwise, the wrong connection will cause some devices to cause a black light or trip condition.
Summary: The above is about how to disassemble the wall switch. I believe we have a better understanding of the wall switch's disassembly method and safety assembly. Of course, if you have better suggestions and ideas, please feel free to consult Xiao Bian.
Wall switch socket
Chipboard Wall Panel,Particle Board,Decorative Panels Walls,Furniture Particle Board
CHANGZHOU ART DECORATION MATERIALS CO.,LTD , https://www.cnartdecor.com